649002

Wagner Super Finish 31 Manual

15
Zoom out
Zoom in
Previous page
1/30
Next page
Super Finish 27 • 31
37
GB
Repairs on the unit

Danger
Switch o unit (OFF).

repairs.
 

Screw out inlet valve trigger with spanner 17mm.1.
Replace stripper (1) and O-ring (2).2.
2
1

Super Finish 27

Place accompanying spanner 36 mm on the inlet
valve housing (1).

Place accompanying spanner 30 mm on the trigger housing
(2).
Release inlet valve housing (1) or trigger housing (2) with
2.
light blows of a hammer on the end of the spanner.
Screw out inlet valve housing or trigger housing with the
3.
inlet valve (3) from the paint section.
Remove clasp (4) by means of a screwdriver.4.
Place accompanying spanner 30 mm on the inlet valve (3). 5.
Withdraw carefully turning the inlet valve.
Clean valve seat (5) with cleaning agent and brush.6.
Clean seals (6, 7) and check for damage, replace if
7.
necessary.
If there are traces of wear in the valve seat, replace inlet
8.
valve.
5
7
6
4
2
3
1
(SF31)
(SF27)
(SF31)
(SF27)
Mounting
Insert inlet valve (3) into the inlet valve housing (1) or the 1.
trigger housing (2) and secure with clasp (4).
Screw unit from inlet valve housing or trigger housing and 2.
inlet valve into the paint section.
Tighten inlet valve housing with spanner 36 mm or trigger 3.
housing with spanner 30 mm and tighten with three light
blows of the hammer on the end of the spanner.

Screw out outlet valve with spanner 22 mm from the paint 1.
section.
Attention
2. Remove clasp (1) carefully with screwdriver, pres-
sure spring (2) presses parts out 3 to 4.
Clean or replace individual parts.3.
Check O-ring (6) for damage.4.
Pay attention to installation position in mounting spring
5.
support ring (3), outlet valve seat (4) and seal ring (5), see
g. 21.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wagner Super Finish 31 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wagner Super Finish 31 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 5,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info