579198
39
Zoom out
Zoom in
Previous page
1/86
Next page
GB
31
Flexio 580 I-Spray
Unscrew the union nut (g. 14, 2) and remove the air cap (3) and nozzle (4). Clean the 4)
air cap, nozzle seal (5) and nozzle with a brush and solvent or water.
Clean the outside of the spray gun and container with a cloth soaked in solvent or
5)
water.
6) Assemble the parts again (see Assembly”).
Assembly
The unit may only be operated with an integer diaphragm (Fig. 13, 3).
Place the diaphragm 1) (Fig. 13, 3) with the pin facing upwards on the bottom section
of the valve. Also see the marking on the gun body.
Place on the valve cover 2) (Fig. 13, 2) and screw it closed.
Place the ventilating hose 3) (Fig. 13, 1) on the valve cover and on the nipple at the gun
body.
Attention! Never operate the device if the nozzle seal is either damaged or
missing. If the nozzle seal is either missing or damaged liquids can enter
the device and increase the risk of an electric shock.
Slide the nozzle seal (Fig. 13, 5) with the groove (slot) facing forwards into the
4)
nozzle.
Place the nozzle (g. 15, 4) on to the gun body with the recess facing downwards.
5)
Attention: Position of needle must be congruent with the nozzle aperture.
(Fig.16)
Put the air cap (Fig. 17, 3) onto the nozzle (4) and tighten it using the union nut (2)6)
Position the adjustment ring (g. 18, 1) on the union nut so that the recesses on the 7)
adjustment ring can snap into both horns on the air cap.
Place the container seal from below on the suction tube and slide it over the collar, 8)
while turning the container seal slightly.
Insert the suction tube with container seal in the gun body.9)
19. Cleaning the Perfect Spray spray
attachment
Screw of the container and empty it. Pull out the suction tub with container seal.1)
CAUTION! Never clean seals, diaphragm and nozzle or air holes of the spray gun with metal
objects.
The ventilation hose and diaphragm are only solvent-resistant to a limited
extent. Do not immerse in solvent, only wipe.
Pull the ventilating hose (Fig.13, 1) at the top from the gun body. Screw o the valve 2)
cover (2). Remove the diaphragm (3). Clean all the parts carefully.
Unscrew the union nut and remove the air cap and nozzle. Clean the air cap, nozzle 3)
seal and nozzle with a brush and solvent or water (Fig. 13).
Clean the outside of the spray gun and container with a cloth soaked in solvent or
4)
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wagner FLEXiO 580 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wagner FLEXiO 580 in the language / languages: Dutch as an attachment in your email.

The manual is 14,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info