Manual Wagner FLEXiO 580 (page 40 of 86) (Dutch)

579198

Zoom out

Zoom in

1/86

Flexio 580 I-Spray

water.

Assemble the parts again (see “Assembly”).5)

Assembly

The unit may only be operated with an integer diaphragm (Fig. 13, 3).

Place the diaphragm 1) (Fig. 13 ,3) with the pin facing upwards on the bottom section

of the valve. Also see the marking on the gun body.

Place on the valve cover 2) (Fig. 13 ,2) and screw it closed.

Place the ventilating hose 3) (Fig. 13, 1) on the valve cover and on the nipple at the gun

body.

Attention! Never operate the device if the nozzle seal is either damaged or

missing. If the nozzle seal is either missing or damaged liquids can enter

the device and increase the risk of an electric shock.

Slide the nozzle seal (Fig. 20, 1) with the groove (slot) facing forwards into the nozzle 4)

(Fig. 20, 2).

Put the nozzle onto the gun body and nd the correct position by turning it. 5)

Put the air cap onto the nozzle and tighten it using the union nut. 6)

Place the container seal from below on the suction tube and slide it over the collar, 7)

while turning the container seal slightly.

Insert the suction tube with container seal in the gun body.8)

20. Maintenance

WARNING! Never operate the machine without the air filter;

dirt could be sucked in and interfere with the function of the

machine. Check the air filter after each use for contaminants.

Disconnect plug before changing parts.

Open the air lter lid with the help of the stirring rod. (Fig. 21)1)

Pull out the air lter and replace it if necessary, depending on how soiled it is. 2)

First, push the new air lter into the bottom part of the compartment. (Fig. 22)3)

Next push it completely into the compartment.

In order to push the air lter into the compartment completely, we recommend using

the stirring rod.

In order to mount the gun more easily apply lubricating grease (enclosed) liberally

to the O-ring at the gun front part. (Fig. 23, 6 and g. 24,5)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Wagner FLEXiO 580 in the language / languages: Dutch as an attachment in your email.

The manual is 14,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Wagner FLEXiO 580 Manual

Product: