Manual Waeco PerfectView CAM29 (page 20 of 141) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

614281

Zoom out

Zoom in

1/141

CAM29 Installing the reversing video camera

➤ Check that the camera is installed securely.

It must be firmly seated and may not fall out of the drill holes due to vibrations.

7.2 Laying cables

Therefore, please observe the following instructions:

 Wherever possible, lay cables inside the vehicle, as they are better protected there

than outside.

If you do need to lay a cable outside the vehicle, ensure that it is well fastened (use

additional cable ties, insulating tape etc.).

 To prevent damage to the cables when laying them, ensure that they are far enough

away from hot or moving vehicle components (exhaust pipes, drive shafts, light sys-

tems, fans, heaters, etc.).

 Wrap good-quality insulating tape around the plug connections of the connecting

cables and every connection on a cable (including inside the vehicle) to ensure no

water can penetrate them (fig. 5 page 5). The most suitable tape for this is self-vul-

canising tape, e.g. made by 3M.

 When laying the cables, make sure:

– They are not kinked or twisted

– They do not rub on edges

– They are not laid in sharp-edged ducts without protection (fig. 2, page 3).

 Attach the cables securely in the vehicle with cable binders, insulating tape or by glue-

ing them to prevent them from being tripped over.

NOTE

Make sure it is correctly aligned. If the camera is not correctly aligned, the pic-

ture will be askew or upside down on the monitor.

NOTICE!

Before drilling any holes, ensure that no electrical cables or other parts of the

vehicle can be damaged by drilling, sawing and filing.

NOTE

 As far as possible, use original ducts for laying the cables, or other suitable

options such as panelling edges, ventilation grilles or dummy plugs. If there

is no rubber plug, produce a suitable hole with a diameter of around 13 mm

and insert a cable bushing sleeve.

 Cables and connections that are not properly installed will cause malfunc-

tions or damage to components. Correct installation of cables and connec-

tions ensures lasting and trouble-free operation of the retrofitted

components.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Waeco PerfectView CAM29 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Waeco PerfectView CAM29 Manual

Product: