614281
19
Zoom out
Zoom in
Previous page
1/141
Next page
Installing the reversing video camera CAM29
EN
18
As entrance monitors in buses
For hidden indoor surveillance.
The CAM 29 reversing video camera is comprised of a camera and the mounting case for
optional installation.
The camera can be installed directly, for example in a bumper.
The power is connected using a cable ready to plug into the monitor.
7 Installing the reversing video camera
I
7.1 Installing the camera
Observe the following information when selecting an installation location for the camera:
Note the length of the camera cable.
If you wish to use the camera as a reversing video camera, installing the camera in the
middle of the bumper is recommended (fig. 4, page 4).
The installation location on the bumper should be perpendicular to the road surface to
ensure the camera is aligned horizontally.
The camera has a 90° horizontal field of view. Due to the field of view, the reversing video
camera can only detect objects near the corner of the vehicle to a limited extent.
The following section describes the procedure for installing the reversing video camera in
the bumper. You can also install the camera in other positions, depending on how you
wish to use it.
I
Select a suitable installation location.
A
Drill a hole in the bumper with a diameter of 17 mm.
Guide the camera with the socket at the front into the drill hole as far as it will go.
Make sure that the camera is aligned correctly.
NOTE
If you do not have sufficient technical knowledge to install and connect the
components in vehicles, you should have a specialist install the reversing video
camera in your vehicle.
NOTE
The installation sleeve provided (fig. 3 , 2, page 4) is not required for the
installation procedure described here.
NOTICE!
Before drilling any holes, ensure that no electrical cables or other parts of the
vehicle can be damaged by drilling, sawing and filing.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Waeco PerfectView CAM29 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Waeco PerfectView CAM29 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info