517983

Waeco MagicSpeed MS50 Manual

47
Zoom out
Zoom in
Previous page
1/122
Next page
GB
47
WIRING AND ASSEMBLY OF THE ELECTRONIC MODULE
5. To secure the electronic module, it is necessary to drill two holes of
Ø 2.5 mm. To do so, hold the electronic module in the desired position
and mark the drill holes. Check before whether sufficient free space
for the drill outlet is present.
6. Secure the electronic module with the metal screws (B 11).
7. Determine the nature of the speed transmission on your vehicle.
Possibility 1: Use the magnet sensor included in the delivery kit
(see chapter 11.0, ✎ I 2).
Possibility 2: Use an original speedometer drive signal. Many
vehicles have an original speedometer drive
signal, e.g. to regulate the radio volume depending
on the speed. Your authorised vehicle dealer will
be able to tell you whether your vehicle has an
original speedometer drive signal.
WARNING! Switch off the ignition before connecting the
orange cable. Is the (positive/earth) cable of the
battery disconnected?
NOTE: Make sure that teher is a constant 12 V
connection (+ terminal 15). Do not use a
fluctuating 12 V connection, e.g. airconditioning,
fan, etc. as the MS 50 will switch off in the case
of current fluctuations.
8. Connect the compact connector to the electronic module.
9. Lay the 3-lead cable (black, white, red) for the vacuum servo-unit
through a suitable opening into the engine compartment. If speed
takeover is effected via the magnet sensor, the shielded 2-lead black
cable (with blue and black inner cables) must also be laid into the
engine compartment.
198
INNHOLDSFORTEGNELSE
Side
1.0 . Introduksjon ................................................................................................... 198
2.0 . Merknader til bruk av installasjonsveiledningen .............................................. 199
3.0 . Generelle sikkerhets- og installasjonsanvisninger .................................... 200-201
4.0 .Forutsetninger for at hastighetskontrollen skal fungere .................................. 201
5.0 . Nødvendig verktøy ........................................................................................ 202
6.0 .Innhold i pakken ............................................................................................. 203
7.0 . Installasjon av vakumservoenheten ........................................................ 204-207
8.0 . Kabling og montering av elektronikkmodulen ........................................... 207-209
9.0 . Montering av koblingsbryter ........................................................................... 210
10.0 Montering av betjeningsdelen ...................................................................210-211
11.0 . Hastighetssensor – installasjon (kardangaksel/forhjulsdrift) ..................... 211-213
12.0 Betjening av hastighetskontrollen MAGIC SPEED ................................... 214-215
13.0 Første gangs ibruktagning, og funksjonstest ................................................. 215
14.0 Sikkerhetsveiledning ....................................................................................... 216
15.0 Prøvekjøring og innstillinger .................................................................... 217-218
16.0 Feilsøking - veiledning ............................................................................. 218-220
1.0 INTRODUKSJON
Hastighetskontrollen MS 50 regulerer kjøretøyets hastighet automatisk.
Kjørehastigheten kan holdes konstant over lengre tid (f.eks. for
overholdelse av fartsgrensen, eller ved lange strekninger på motorveien),
slik at du bedre kan konsentrere deg om trafikken.
MS 50 kan installeres i nesten alle motorkjøretøyer med 12 V spenning,
uansett om kjøretøyet er utstyrt med automatgir eller manuelt gir.
Pakken inneholder alle mekaniske og elektriske komponenter som er
nødvendige for installasjonen i kjøretøyet.
Book_MS-50_A6.p65 10-02-2003, 11:1147
… 47 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Waeco MagicSpeed MS50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Waeco MagicSpeed MS50 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info