517983
40
Zoom out
Zoom in
Previous page
1/122
Next page
40
GENERAL SAFETY AND INSTALLATION INSTRUCTIONS
4.0 PREREQUIREMENTS FOR THE MS 50
CRUISE CONTROL TO FUNCTION
- Vehicle electrics with 12 volts
- Throttle lever or a throttle linkage
- Under-pressure, vacuum
The following data must be entered again depending upon the vehicle
equipment:
- Radio code
- Clock
- Timer
- Board computer
- Seat position
Information on the adjustment can be read in the respective operating
instructions.
Warning! The components of the MAGIC SPEED MS 50 which are
inside the vehicle must be securely fixed so that they cannot come
loose and injure the vehicle’s occupants under any circumstances
(emergency braking, traffic accident).
Caution! Never install within the operation area of airbags.
Caution! To check the voltage in electric cables, use only a diode
test lamp or a voltmeter. Test lamps which light up take too much
current and the vehicle electronics may be damaged.
Caution! In order to avoid damages, pay attention that there is
sufficient free space for the drill outlet.
205
N
4. Fest Bowden-kabelen direkte på den originale gass-wiren med den
ekstra holderen, eller med Bowden-kabelfestet. (se C 2 til E 3).
5. Fest bolten eller klemblokken på gasstaget eller gass-wiren som vist i
illustrasjonene. ( C 2 til E 3) Skyv innerkabelen i MS-50-Bowden-
kabelen gjennom bolten eller klemblokken. Sett stopperen på Bowden-
kabelen, og skyv den frem til bolten eller klemblokken. Forsikre deg om
at forgasseren eller innsprøytningspumpen står i tomgangsstilling (ved
varm motor). Sett stopperen fast på Bowden-kabelen.
6. Trå gasspedalen helt i bunn, og forsikre deg om at Bowden-kabelen
ikke kan hekte seg fast i noe. Aktiver tilkoblingsarmen på gasspjeldet
eller dieselpumpen med ene ene hånden, og kontroller om den løse
Bowden-kabelen kan hekte seg fast i noe Hvis så er tilfelle, må
Bowden-kabelen føres på en annen måte.
7. Når gasspedalen aktiveres må innerkabelen til MS-50 gli gjennom
festebolten eller klemmblokken.
Bolten må kunne dreies for å sikre at wiren kan gli gjennom.
FORSIKTIG! Hastighetskontrollen er utstyrt med en rekke
sikkerhetskjennetegn, for å garantere en sikker
funksjon for de elektroniske komponentene. Disse
sikkerhetskjennetegnene kan imidlertid ikke
forhindre at motoren plutselig akselererer
ukontrollert hvis gasstaget har hektet seg fast.
Kontroller derfor omhyggelig flere ganger.
OBS! Alle løse vakuumslanger må sammenføyes for å
forhindre skader på motoren og forhøyede
eksosverdier.
INSTALLASJON AV VAKUMSERVOENHETEN
Book_MS-50_A6.p65 10-02-2003, 11:1140
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Waeco MagicSpeed MS50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Waeco MagicSpeed MS50 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info