517984
24
Zoom out
Zoom in
Previous page
1/108
Next page
Connecting the gas detector MagicSafe MSG150
24
8.3 In combination with MS-620 or MS-650
If you wish to use the gas detector in combination with
z MS-620, please use the circuit diagram a, page 7
z MS-650, please use the circuit diagram a, page 7
Caution!
If you combine MAGIC WATCH MSG-150 with the MS-620 or MS-650 alarm
system, you must configure the convenience output of the software as follows:
MS-620: set the convenience output to “1” (see the “Programming Magic-
Safe – software functions” chapter, No. 3).
MS-650: the convenience output (see “Software settings” chapter, button 2-
1) must be set to “OFF”.
Disconnect the 12/24 V plug from the cable.
Remove around 10 cm of the outer insulation on the end of the cable.
Connect the black cable to the bodywork earth (terminal 31).
Connect the yellow cable to the following cable of the external alarm system:
Blue/black cable (MS-620)
Green/red cable (MS-650)
Connect the orange cable with the brown/white cable of the external alarm system
(MS-620 and MS-650).
Connect the red cable to 12/24 V continuous positive.
The cable must be fused with at least a 1 A fuse.
If the gas detector is to be switched as the main alarm on the MS-620 or MS-650
external alarm system, connect
The relay contact 1 (3 1, page 4) to the bodywork earth (terminal 31) and
The relay contact 2 (3 2, page 4) to the grey wire of the external alarm system
(MS-620 or MS-650).
MSG-150.book Seite 24 Donnerstag, 30. Oktober 2008 5:03 17
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Waeco MagicSafe MSG150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Waeco MagicSafe MSG150 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info