517984
22
Zoom out
Zoom in
Previous page
1/108
Next page
Connecting the gas detector MagicSafe MSG150
22
7.2 Mounting the gas detector
Note the following information when selecting a location to mount the gas detector:
z Note the length of the cable.
z The gas detector should be mounted in the vicinity of the sleeping area at the height
of the mattress.
Select a suitable installation location.
Caution!
Before making any drill holes, ensure that no electrical cables or other parts of
the vehicle can be damaged by drilling.
Hold the mounting panel on the chosen location and mark the two drill holes (5,
page 5).
Screw the mounting panel tight with the two screws (6, page 5).
Insert the gas detector on the mounting panel (7, page 5).
Insert the plug of the gas detector in the socket of your 12/24 V DC voltage supply.
The green LED on the gas detector (8 1, page 5) flashes for approx. 10 min. The
sensor is then brought to the operating temperature.
When the green LED glows constantly, the gas detector is ready for operation.
8 Connecting the gas detector
8.1 As a single device
If you use the MSG-150 as a single device, you can either
z Switch it on with the 12/24 V plug.
z Switch it on with the RV-AMP-SW additional switch (accessory), if there is no 12/24 V
socket in the sleeping area.
Connecting the MSG-150 with a 12/24 V plug
Insert the 12/24 V plug into a socket with a constant 12/24 V supply.
This socket should be connected to the battery.
An acoustic signal sounds and the green LED (8 1, page 5) flashes for approx 10
minutes.
During this time the MSG-150 conducts a system test and the sensor is brought to
operating temperature.
MSG-150.book Seite 22 Donnerstag, 30. Oktober 2008 5:03 17
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Waeco MagicSafe MSG150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Waeco MagicSafe MSG150 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info