517972
23
Zoom out
Zoom in
Previous page
1/120
Next page
PerfectView Mounting the camera
23
z Ensure that the installation location of the camera is sufficiently firm (e.g. to prevent
the camera from being knocked down by branches that may brush over the roof of the
vehicle).
z Always use the supplied insulation pad (fig. 3 3, page 3). This prevents residual cur-
rent caused by a poor earth connections in the vehicle. Residual current can cause
lines of interference in the picture or humming in the loudspeakers or even damage
components.
z Observe the fastening instructions:
There must be sufficient space behind the chosen installation location to be able
to carry out the mounting procedure.
Suitable measures must be taken to prevent water penetrating through any holes
made (e.g. by using screws and sealant and/or spraying the outer attachment
parts with a sealant).
The location on the body where you wish to attach the camera must be rigid
enough to allow the camera to be tightly fastened.
z Check beforehand that there is sufficient space on the other side for the drill head to
come out (fig. 1, page 3).
z If you are not sure about the location you have chosen, ask your vehicle manufacturer
or dealer.
I
Note
We recommend greasing the threads of the bolts to prevent corrosion.
To perform the installation, proceed as follows:
Hold the bottom camera holder on the chosen location and mark two points for the
drill holes (fig. 6, page 5).
Using a hammer and centre punch, gently pre-punch the previously marked points to
prevent the drill head from slipping off.
If you want to screw on the bottom camera holder with self-tapping screws
a
Caution!
The holder may only be attached to steel panels with a minimum thickness of
1.5 mm using self-tapping screws.
Drill Ø 2 mm holes at the points you have just marked.
Deburr all drill holes and apply rust-protection.
Place the insulating plate (fig. 3 5, page 3) where the bottom camera holder is to be
fitted.
The insulation plate serves as a seal and protects the paint.
Screw on the camera holder using the self-tapping screws.
CAM30_CAM40.book Seite 23 Donnerstag, 14. Januar 2010 5:32 17
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Waeco CAM30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Waeco CAM30 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info