513137
35
Zoom out
Zoom in
Previous page
1/172
Next page
Troubleshooting
Page 31
DISPLAY TROUBLESHOOTING
If you encounter problems with the DTU-1931 display, refer to the following tables; your problem
may be described here and you can try the solution offered. For additional information about color
issues, see the documentation that came with your operating system or applications.
GENERAL DISPLAY PROBLEMS
No display. The power
LED is off.
Verify that the AC power cable is connected, and that the
DTU-1931 power switch is turned on.
No display. The power
LED is lit blue.
Check the contrast, brightness, and backlight controls.
Adjust as necessary. Or, open the OSD menu and select the
R
ESET option.
The power LED is lit
orange.
A ‘no signal go to power
save’ message appears
briefly on your display
screen.
Your computer may be in a power management mode.
Touch the pen tip to the display screen, move the mouse, or
depress any key on your keyboard.
Turn off both your computer and the DTU-1931 pen display
tablet. Check the video cable for bent or broken connector pins.
Then properly connect the video cable and turn on the
DTU-1931 and your computer.
Verify that the DVI/VGA switch is properly set. Restart your
computer after changing the position of the switch.
Verify that the video card is properly installed.
A ‘cable disconnect go to
power save’ message
appears briefly on your
display screen.
Check that your computer is turned on.
Verify that you are using the video cable that came with the
DTU-1931.
Check that the DTU-1931 video cable is fully connected.
Turn off both your computer and the DTU-1931 pen display.
Check the video cable and any video adapters for bent or broken
connector pins. Then properly connect the video cable and any
necessary adapters.
An ‘out of range
message appears briefly
on your display screen.
The input signal frequency is incorrectly set or not compatible
with the DTU-1931. Set the refresh rate (vertical frequency)
between 50 and 75 Hz. If your video card driver supports
adjustment of the horizontal frequency, make sure it is set to
some value between 30 and 80 kHz. On a single monitor system
you will need to connect a different display to change the refresh
rate.
The resolution is set too high (1280 x 1024, maximum).
The refresh rate is set too high (75 Hz maximum).
Set the display properties to detect plug and play monitors.
A ‘set refresh range
message appears briefly
on your display screen.
The maximum refresh rate is 75 Hz. Set the refresh rate (vertical
frequency) to some value between 50 and 75 Hz.
The image appears
multiple times on the
display.
Do not extend the video cable. Do not use an input selector
switch box.
DTU193_Manual.fm Page 31 Monday, September 15, 2008 2:42 PM
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wacom DTU1931 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wacom DTU1931 in the language / languages: English, German, French as an attachment in your email.

The manual is 6,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info