Manual Wacom DTU1931 (page 34 of 172) (English, German, French)

513137

Zoom out

Zoom in

1/172

Troubleshooting

Page 30

TESTING YOUR PEN

If the pen does not work as you expect, it is a good idea to first check the assigned functions or

reset the pen to its default conditions. A quick way to reset a pen to its default settings is to remove

it from the T

OOL list by clicking on the list’s [ – ] button. After the pen has been removed, place it

back onto the display screen surface and the pen will be re-added to the T

OOL list with its default

settings.

Open the Wacom Tablet control panel and click on the A

BOUT button. In the dialog box that

appears, click on the D

IAGNOSE... button to open the DIAGNOSTICS dialog box. The DIAGNOSTICS

dialog box displays dynamic information about the pen display tablet and pen. This information is

used when testing the pen display tablet and your pen.

If more than one pen display unit is connected to your system, be sure to select the unit for which

you are testing in the T

ABLET INFO column.

Note: When testing your pen buttons, if a button is set to RADIAL MENU or OPEN/RUN..., that function will

occur when the button is pressed. In this case you may want to change that button’s function before

testing.

1. While observing the POINTING DEVICE INFO column, bring your pen within 5 mm (0.2 inch) of the

display screen. A value for P

ROXIMITY, the DEVICE NAME, and DEVICE TYPE should be displayed.

2. Move your tool along the tablet surface. The X and Y D

ATA values should change to reflect the

tool position.

3. Test your pen switches. The DTU-1931 status LED should light blue each time you click with

the pen tip, press the side switch, or press the pen’s eraser to the display screen.

• Press on the display screen surface with the pen tip – the SWITCHES state and PRESSURE

value should change. (P

RESSURE should change from approximately 0% with no pressure

applied to approximately 100% when full pressure is applied.)

• Next, press the side switch (when equipped) without pressing the tip to the tablet – the

WITCHES state should change. Do this for both positions of the DuoSwitch.

• Press the pen eraser (when equipped) to the display screen – the SWITCHES state and

RESSURE value should change. (PRESSURE should change from approximately 0% with no

pressure applied to approximately 100% when full pressure is applied.)

4. When you are done, click on the C

LOSE button to exit the dialog box.

Tip = 1, DuoSwitch (lower position) = 2, DuoSwitch (upper position) = 3, Eraser = 1

DTU193_Manual.fm Page 30 Monday, September 15, 2008 2:42 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Wacom DTU1931 in the language / languages: English, German, French as an attachment in your email.

The manual is 6,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Wacom DTU1931 Manual

Product: