513137

Wacom DTU1931 Manual

24
Zoom out
Zoom in
Previous page
1/172
Next page
Working with your DTU-1931
Page 20
BASIC PEN OPERATIONS
Pointing and selecting: Move the pen slightly above the DTU-1931 display
screen to position the screen cursor; you do not need to touch the display
surface. The cursor jumps to the location where you place the pen. Press the
pen tip on the display screen to make a selection.
Note: You must calibrate the pen display tablet to correctly align the screen cursor with
the pen tip. (See Calibrating the DTU-1931 on page 23.) If the screen cursor does not
jump to a position close to the pen tip when you place the pen on the display screen, then
the pen tablet driver may not be installed or is not loading. Install the pen tablet driver
software if necessary. Otherwise, see Troubleshooting, beginning on page 28.
Clicking: Tap the display screen once with the pen tip, or touch the pen to the
display screen with enough pressure to register a click.
Windows tip: To make navigating with the pen easier, configure Windows to select when
the pen is over an icon and to launch the icon with a single click. To turn on this feature,
first open a folder.
For Windows Vista, From the ORGANIZE pull-down menu choose FOLDER AND SEARCH
OPTIONS. From the GENERAL tab select SINGLE-CLICK TO OPEN AN ITEM (POINT TO SELECT).
For Windows XP
, from the TOOLS pull-down menu choose FOLDER OPTIONS.... From the
G
ENERAL tab select SINGLE-CLICK TO OPEN AN ITEM (POINT TO SELECT).
Double-clicking: Press the upper side switch, or quickly tap the
display screen twice in the same place with the pen tip.
Double-clicking is easier when the pen is perpendicular to the tablet
screen. See the electronic Software User’s Manual for information
on fine-tuning the double-click area.
Dragging: Select an object, then slide the pen tip across the display screen to
move the object.
Using the side switch: The pen may be equipped with a DuoSwitch. This switch has two
programmable functions that can be selected by rocking the switch in either direction. You can use
the DuoSwitch whenever the pen tip is within 5 mm (0.2 inch) of the display screen surface; you do
not need to touch the pen tip to the display surface in order to use the switch. By default, the upper
switch is set to D
OUBLE CLICK, and the lower switch is set to RIGHT CLICK.
Drawing and writing with pressure sensitivity: The pen responds to the nuance and inflection of
your hand movements, enabling you to create natural-looking pen and brush strokes within
applications that support this feature. To draw and write with pressure, select a pressure-sensitive
tool from your application’s tool palette. As you work on the screen surface, use various amounts of
downward pressure on the tip of the pen. Press lightly for thin lines or softer color. Press harder for
thick lines or dense color.
Erasing: In supporting applications, the pen’s eraser works like the eraser on a
pencil. In text applications, use the eraser to select text, then lift the eraser
from the tablet to delete the text.
DTU193_Manual.fm Page 20 Monday, September 15, 2008 2:42 PM
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wacom DTU1931 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wacom DTU1931 in the language / languages: English, German, French as an attachment in your email.

The manual is 6,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info