596633
47
Zoom out
Zoom in
Previous page
1/72
Next page
Troubleshooting
Page 45
Display troubleshooting
If you encounter problems with the Cintiq display, refer to the following tables; your problem may be
described here and you can try the solution offered. For additional information about color issues, refer
to the documentation that came with your operating system or applications.
General display problems
No display. The power LED
is off.
Verify that the light on the AC power adapter is on and the
power cable is securely plugged into Cintiq’s power
receptacle. Check that Cintiq’s power switch is turned on.
No display. The power LED is
lit blue.
Check the contrast, brightness, and backlight controls.
Adjust as necessary, or open the OSD menu, go to the RESET
menu and select the RECALL option.
The power LED is lit orange.
No display or a “no input signal”
message briefly appears on
your display screen.
Your computer may be in a power management mode.
Touch the pen tip to the Cintiq display screen, move the
mouse, or depress any key on your keyboard.
Turn off both your computer and the Cintiq pen display, and
check the video cable for bent or broken connector pins.
Then properly reconnect the video cable and turn on Cintiq
and your computer.
Verify that the DIGITAL/ANALOG (DVI/VGA) switch is properly
set. Restart your computer after changing the position of the
switch.
Verify that the video card is properly installed.
No display or a “cable
disconnect” message briefly
appears on your display
screen.
Check that your computer is turned on.
Verify that the video cable is properly connected.
Turn off both your computer and the Cintiq pen display, and
check the video cable for bent or broken connector pins.
Then properly reconnect the video cable and turn on Cintiq
and your computer.
An “out of range” message
briefly appears on your display
screen.
The input signal frequency is incorrectly set or not compatible
with Cintiq. Set the refresh rate (vertical frequency) to 60 Hz
(or between 50 and 75 Hz if you are using a resolution of less
than 1680 x 1050 pixels). If your video card driver supports
adjustment of the horizontal frequency, make sure it is set to
some value between 30 and 82 kHz. On a single monitor
system you will need to connect a different display to change
the refresh rate.
The resolution is set too high (1680 x 1050, maximum).
Set the display properties to detect plug and play monitors.
The image appears multiple
times on the display.
Do not extend the video cable. Do not use an input selector
switch box.
Cintiq20WSX_Manual.fm Page 45 Monday, January 15, 2007 9:23 AM
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wacom CintiQ - 20WSX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wacom CintiQ - 20WSX in the language / languages: English as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info