596633
45
Zoom out
Zoom in
Previous page
1/72
Next page
Troubleshooting
Page 43
Testing your input tools and pen display controls
If the Grip Pen, or the Cintiq ExpressKeys or Touch Strips do not work as you expect, it is a good idea to
first check the assigned functions or reset them to their default conditions. A quick way to reset a pen to
its default settings is to remove it from the TOOL list by clicking on the list’s [ – ] button. After the pen has
been removed, place it back onto the display screen surface and the pen will be re-added to the TOOL
list with its default settings.
Open the Wacom Tablet control panel and click on the ABOUT button. In the dialog box that appears,
click on the DIAGNOSE... button to open the DIAGNOSTICS dialog box. The DIAGNOSTICS dialog box
displays dynamic information about the Cintiq pen display tablet and pen. This information is used
when testing Cintiq and your input tool(s).
If more than one Cintiq unit is connected to your system, be sure to select the unit for which you are
testing in the TABLET INFO column.
Note: When testing your tool buttons, if a button is set to POP-UP MENU or OPEN/RUN..., that
function will occur when the button is pressed. In this case you may want to change that button’s
function before testing.
Testing the ExpressKeys
1. With the DIAGNOSTICS dialog box open, observe the TABLET INFO column as you test the
ExpressKeys. If you have more than one Cintiq unit connected to your system, be sure to select
the unit you are testing from the TABLET INFO column.
2. Test the ExpressKeys by pressing them one at a time. Each time you press a key, its number will
be displayed next to either the LEFT KEYS or RIGHT KEYS category, depending on which keys group
you are testing.
When you are done, click the CLOSE button to exit the dialog box.
Testing the Touch Strips
1. With the DIAGNOSTICS dialog box open, observe the TABLET INFO column as you test each Touch
Strip. If you have more than one Cintiq unit connected to your system, be sure to select the unit you
are testing from the TABLET INFO column.
2. Slide your finger up or down along the entire length of the Touch Strip you want to test. As you
touch and move your finger along the Touch Strip, a number will indicate the current finger position
for the respective Touch Strip next to LEFT TOUCH STRIP or RIGHT TOUCH STRIP.
When you are done, click the CLOSE button to exit the dialog box.
Cintiq20WSX_Manual.fm Page 43 Monday, January 15, 2007 9:23 AM
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wacom CintiQ - 20WSX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wacom CintiQ - 20WSX in the language / languages: English as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info