766099
28
Zoom out
Zoom in
Previous page
1/156
Next page
28 41405 | 02 | 2021 | V3
Incorrectly installed electric fences with stronger current can cause electric shocks that
lead to loss of muscle control. An electric shock can cause painful muscle spasms that
can break bones and dislocate joints.
Info
Please note that the following specications regarding the marking of electric animal
fences are country-specic. Please follow the regulations of your respective country.
In order to warn outsiders of possible dangers, electric animal fences that run along a
public road or path must be clearly signed at frequent intervals. These warning signs
must be clearly visible and attached to the fence posts or the fence itself. Warning signs
must adhere to the following guidelines:
Minimum size of 100 mm x 200 mm
Black lettering (min. font size of 25 mm, on both sides, non-erasable) on a yellow
background with the analogous content ATTENTION ELECTRIC FENCE“ and/or
the symbol shown in the illustration:
WARNING
ELEKTROZAUN
ELECTRIC FENCE
CLÔTURE ÉLECTRIQUE
SCHRIKDRAAD
ELEKTRISK HEGN
ELEKTRISKT STÄNGSEL
RECINTO ELETTRICO
CERCADO ELECTRICO
ЭЛЕКТРОИЗГОРОДЬ
Whenever an electric animal fence crosses a public footpath, a non-electried gate
must be erected at this point or an overpass must be available. Electried wires lying
nearby must also be marked with warning signs.
In general, warning signs must be placed at each gate or access point and at intervals
of max. 10 m.
2.2 Site and Installation Safety
The following minimum distances must be observed when installing connection lines
and electric animal fences near high-voltage lines:
Voltage of the power line Air Gap
≤ 1.000 volts 3 metres
> 1.000 ≤ 33.000 volts 4 metres
> 33.000 volts 8 metres
When installing connection lines and electric animal fences near a high-voltage line,
they may only be installed at a maximum height of 3 m above the ground. This height
must be maintained on each side of the vertical projection of the outer conductor of
the high-voltage line on the ground. The following distances apply:
2 m for high-voltage lines with a nominal voltage up to 1,000 V
15 m for high-voltage lines, with a rated voltage of more than 1,000 V
Follow the grounding instructions in the manual.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Voss Impuls duo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Voss Impuls duo in the language / languages: English, German, Dutch, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 7,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Voss Impuls duo

Voss Impuls duo User Manual - English - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info