Manual Vortex VIPER HS LR Riflescope (page 7 of 11) (English)

540497

Zoom out

Zoom in

1/11

HS LR

RIFLESCO PE

Final Range Sight-In and CRS Stop-Set

After the riflescope has been bore-sighted, final sight-in and CRS stop-set

should be done at the range. Sight in and zero the riflescope at the preferred

distance using the exact ammunition expected to be used while shooting.

100 yards is the most common zero distance, although a 200 yard zero may

be preferred for long range applications.

Be sure the reticle is in focus (see Reticle Focus on page 5) and

set the side focus adjustment to match the distance being used for

sight-in:

1. Following all safe shooting practices, fire a three-shot group as

precisely as possible.

2. Next, adjust the reticle to match the approximate center of the shot

group (see Windage and Elevation Adjustments on page 6).

Note: If the rifle is very solidly mounted and cannot be moved, simply

look through the scope and adjust the reticle until it is centered on the

fired group.

3. Carefully fire another three-shot group and see if the bullet group is

centered on the bullseye.

This procedure can be repeated as many times as necessary to achieve a

perfect zero.

Visually bore-sighting a rifle.

Bore Sighting

Initial bore sighting of the riflescope will save time and money at the range.

This can be done in a number of ways. A mechanical or laser bore sighter

can be used according to the manufacturer’s instructions. On some rifles,

bore sighting can be done by removing the bolt and sighting through the

barrel.

• Place the rifle solidly on a rest and remove the bolt.

• Sight through the bore at a target approximately 100 yards away.

• Move the rifle and rest until the target is visually centered inside the

barrel.

• With the target centered in the bore, make windage and elevation

adjustments until the reticle crosshair is also centered over the target.

To visually bore sight a rifle:

1312

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vortex VIPER HS LR Riflescope in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vortex VIPER HS LR Riflescope Manual

Product: