540482
9
Zoom out
Zoom in
Previous page
1/11
Next page
17 16
RETICL E
Final Range Sight-In
After the riflescope has been bore-sighted, final sight-in should be done at
the range using the exact ammunition expected to be used while shooting.
Sight in and zero the riflescope at the preferred distance. 100 yards is the
most common zero distance, although a 200 yard zero may be preferred for
long range applications.
Be sure the reticle is in focus (see Reticle Focus section on page 6) and
adjust the side focus knob if present until the target image is sharp and
without parallax error (see Using the Side Focus section on page 8).
1. Following all safe shooting practices, fire a three-shot group as
precisely as possible.
2. Next, adjust the reticle to match the approximate center of the shot
group. Be sure to read page 1112 prior to making adjustments.
Note: If the rifle is very solidly mounted and cannot be moved, simply
look through the scope and adjust the reticle until it is centered on the
fired group.
3. Carefully fire another three-shot group and see if the bullet group is
centered on the bulls eye.
This procedure can be repeated as many times as necessary to achieve a
perfect zero.
mainTenance
Cleaning
The fully waterproof and fogproof Vortex Razor HD riflescope
requires very little routine maintenance other than periodically
cleaning the exterior lenses. The exterior of the scope may be cleaned
by wiping with a soft, dry cloth.
When cleaning the lenses, be sure to use products, such as the Vortex
Fog Free cleaning products or Lens Pen, that are specifically designed
for use on coated optical lenses.
Be sure to blow away any dust or grit on the lenses prior to wiping
the surfaces.
Using your breath, or a very small amount of water or pure
alcohol, can help remove stubborn things like dried water spots.
Lubrication
All components of the Vortex Razor HD riflescopes are permanently
lubricated, so no additional lubricant should be applied.
Note: Other than to remove the top turret cover for zeroing purposes,
do not attempt to disassemble any components of the riflescope.
Disassembling of riflescope may void warranty.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vortex RAZOR HD GEN II Riflescope at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vortex RAZOR HD GEN II Riflescope in the language / languages: English as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info