540482

Vortex RAZOR HD GEN II Riflescope Manual

6
Zoom out
Zoom in
Previous page
1/11
Next page
11 10
RETICL E
L-TEC
TM
Turrets
This Razor HD Gen II riflescope features the fast, accurate, easily-read
L-TEC elevation and windage turrets
with integrated locking mechanisms
preventing accidental adjustments. The
turrets feature the L-TEC zero stop
which provides a reliable return to the
original zero when long distance shots
have been dialed. Note: The turrets
will allow a slight over travel (1/2
mrad or 1.25 MOA) for shooters who
occasionally need to dial down below
their zero.
To make adjustments:
1. Pull the windage or elevation turret knob outwards to disengage the
lock.
2. Turn the knob in the desired direction: up or down for elevation
adjustments; left or right for windage adjustments.
3. After the shot, return knobs to the zero position. The elevation turret
can simply be spun clockwise until reaching a hard stop against the
zero stop. Then, turn the elevation turret just slightly (1/2 mrad or 1.25
MOA) in a counter-clockwise direction until the 0 mark on the cap
lines up with the indicator mark on the turret body.
4. Push turret knobs inwards to return to the locked position.
MOA/MRAD Adjustments
Each click of the Razor HD turret will move the point-of-impact either
.25 MOA or .1 mrad depending on the model. (Refer to MOA and MRAD
Adjustments on page 5 for more details).
Elevation Dial
Windage Dial
Adjusting the L-TEC Turrets for Bore and Range Sighting
Prior to making any zero adjustments, be sure the L-TEC turret caps are
correctly positioned with the 0 mark on the turret cap indexed to the
reference line on the turret body.
• Lift the elevation turret cap and rotate turret clockwise until it hits
a hard stop. Then, rotate just slightly (1/2 mrad or 1.25 MOA) in a
counter-clockwise direction until the 0 mark on the cap lines up with
indicator line on the turret body. Once aligned, push the cap back
down.
• Lift the windage turret cap and rotate until the 0 mark on the cap
lines up with indicator line on turret body. Depending on previous
cap orientation, you may have to rotate either clockwise or counter-
clockwise to do this. Once aligned, push the cap back down.
Align the 0 on turret
cap with indicator line
on turret body.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vortex RAZOR HD GEN II Riflescope at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vortex RAZOR HD GEN II Riflescope in the language / languages: English as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info