766434

Vonyx 172.990 - STM3030 Manual

4
Zoom out
Zoom in
Previous page
1/20
Next page
4
UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving of the equipment, carefully unpack the carton, check the contents to ensure that all parts
are present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection
if any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that an equipment must be returned to the factory, it is important that the equipment be returned in the
original factory box and packing.
If the equipment has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately.
The arising condensation water might damage your device. Leave the device switched off until it has reached room
temperature.
POWERSUPPLY
On the label on the backside of the equipment is indicated on this type of power supply must be connected. Check that the
mains voltage corresponds to this, all other voltages than specified, the equipment can be irreparably damaged. The equipment
must also be directly connected to the mains and may be used. No dimmer or adjustable power supply.
OPERATION
1. POWER ON - Once you have made all the equipment connections to your DJ-mixer, press the POWER (11). The power
will turn on and the POWER LED (10) will glow RED.
2. CHANNEL 1 - SWITCH (4) allows you to select the PHONO 1/LINE 1 (18) jack to input phono or line level. The CHANNEL
SLIDE (5) controls the output level of this channel.
3. CHANNEL 2 - SWITCH (6) allows you to select the PHONO 2/LINE 2 (19) jack to input phono or line level. The CHANNEL
SLIDE (7) controls the output level of this channel.
4. CHANNEL 3 - SWITCH (8) allows you to select the MP3 OR LINE 3 (20) jack to input phono or line level. The CHANNEL
SLIDE (9) controls the output level of this channel.
5. CROSSFADER - The CROSSFADER (13) allows you to the Mixing CH1/CH2 source into another.
6. MIC – Connect the microphone with a 1/4” connector at the rear panel (16 and 17). The volume of microphone 1 and 2 can
be controlled with the microphone volume control (2).
7. TALKOVER (3) - The purpose of the talkover section is to allow the program playing to be muted so that the mic can be
heard above the music. When you press the SWITCH, the talk over will be on and the volume of all sources except the Mic
inputs are lowered by 12dB. The MIC VOL (2) allow you to control the level of MIC1/MIC2.
8. PHONE - Connect your headphones to the headphones socket (22) and select the desired channel (channel 1-3 or MIC)
for monitoring with the Cue switch(1). With this knob PHONE(14), you can adjust the headphones volume
9. VU-Meter - The VU-meter (12) indicates either the MASTER output left and right levels.
10. MP3 PLAYER (15) - SD / USB / BT-Player. See explanation later.
FRONT PANEL
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonyx 172.990 - STM3030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonyx 172.990 - STM3030 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info