819206

Vonroc VC507DC Manual

8
Zoom out
Zoom in
Previous page
1/80
Next page
8
EN
WWW.VONROC.COM
Your ash cleaner is equipped with a blowing
function. This function can be used to blow ash
remains and dust out of corners and crevices which
are difficult to access with vacuuming.
1. Switch off (1) the machine and remove the
battery (14).
2. Unlock the locking clamp (5) and remove the
top section (8).
3. Before blowing, remove the filter (12) and
remove all dirt and debris from the container
(7).
4. Reattach the top section (8) again and lock the
locking clamps (5). Fig. E-1, E-2.
5. Insert one end of the hose (9) into the blowing
port (4) on top of machine. Fig. G.
6. Place the battery (14).
7. Press the power switch (1) into the “
ON/1”position to start your ash cleaner.
8. The machine is now ready for blowing ashes
and dust.
9. Press the power switch (1) into the “
OFF/0”position to switch off your machine.
Finish operation (Fig. F)
1. Turn off (1) the machine and remove the battery
(14).
2. Remove the top section (8) and empty the
container (7).
3. Clean the machine with a soft cloth.
4. Disconnect hose, tube and container.
5. Clean hose connectors, hose and tube after
use, and keep them unblocked.
6. Stow away the hose and accessory at the
machine. Store the appliance in a dry room.
5. MAINTENANCE
Before cleaning and maintenance, always
switch off the machine and remove the
battery pack from the machine.
Clean the machine casings regularly with a soft
cloth, preferably after each use. Make sure that
the ventilation openings are free of dust and
dirt. Remove very persistent dirt using a soft
cloth moistened with soapsuds. Do not use any
solvents such as gasoline, alcohol, ammonia, etc.
Chemicals such as these will damage the synthetic
components.
Filters (Fig. B)
For optimal performance it is recommended
to regularly change the filter (12)
depending on level of use.
1. Carefully remove HEPA filter (12).
2. Clean the dust on the HEPA filter (12) with a
brush, and if necessary, wash it.
3. Do not use cleaning products, solvents or sharp
objects for any cleaning of the appliance, this
includeds the washable HEPA filter
4. Allow filter to air dry before installing and using
again.
5. Reinstall the filter.
ENVIRONMENT
Faulty and/or discarded electrical or
electronic apparatus have to be collected at
the appropriate recycling locations.
Only for EC countries
Do not dispose of power tools into domestic waste.
According to the European Guideline 2012/19/EC
for Waste Electrical and Electronic Equipment and its
implementation into national right, power tools that
are no longer usable must be collected separately
and disposed of in an environmentally friendly way.
WARRANTY
VONROC products are developed to the highest
quality standards and are guaranteed free of defects
in both materials and workmanship for the period
lawfully stipulated starting from the date of original
purchase. Should the product develop any failure
during this period due to defective material and/or
workmanship then contact VONROC directly.
The following circumstances are excluded from this
guarantee:
• Repairs and or alterations have been made
or attempted to the machine by unauthorized
service centers;
• Normal wear and tear;
• The tool has been abused, misused or
improperly maintained;
• Non-original spare parts have been used.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc VC507DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc VC507DC in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 11.61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info