819206

Vonroc VC507DC Manual

7
Zoom out
Zoom in
Previous page
1/80
Next page
EN
7
WWW.VONROC.COM
The charger has 2 LED indicators (19) which
indicate the status of the charging process:
Red LED Status Green LED status Charger status
Off Off No power
Off On
Standby mode:
- No battery is
inserted or,
- Battery inserted
but charging has
finished
On Off Battery charging in
progress
• Fully charging the 2Ah battery may take up to
60 minutes.
• Fully charging the 4Ah battery may take up to
120 minutes.
After the battery is fully charged remove the
charger plug from the outlet and remove the
battery from the charger.
• Slide the HEPA filter (12) over the filter
holder(13) as shown in Fig. D.
Clean the HEPA filter (12) regularly and
after every heavy use to maintain the
suction power.
• Place the top section (8) on the container (7) as
shown in Fig. E-1.
• Secure the metal locking clamps (5) of the
container to the top section (8) as show in Fig.
E-2.
• Close the metal locking clamps (5) by pushing
them downwards.
• Connect the suction hose (9).
For vacuuming (Fig. F): Connect the suction
hose (9) to the vacuum port (3).
For blowing (Fig. G): Connect the suction hose
(9) to the blowing port (4).
• Connect the round nozzle (10) or the crevize
nozzle (11) to the hose (9).
4. OPERATION
Switching the machine on/off (Fig.A)
Do not vacuum without a Hepa filter!
• To switch on the vacuum cleaner, move the On/
Off switch (1) forwards (direction ON).
• To switch off the vacuum cleaner, move the On/
Off switch (1) backwards (direction OFF).
Vacuuming (Fig. D, E-1, E-2, F)
Clean the HEPA filter (12) regularly and
after every heavy use to maintain the
suction power.
Fine dust, such as dust from cement, soot
and plaster are too fine to be used. Risk for
getting into the motor and damaging it.
1. Switch off (1) the machine and remove the
battery (14).
2. Unlock the metal locking clamps (5) and remove
the top section (8).
3. Before vacuuming, remove all dirt and debris
from the container (7).
4. Fit the filter. Carefully slide the HEPA filter (12)
over the filter holder (13) as shown in Fig. D.
5. Place the top section (8) on the container (7) as
shown in Fig. E-1.
6. Reattach the top section (8) again and lock the
locking clamps (5). Fig E-2.
7. Insert one end of the hose (9) into the
vacuuming port (3).
8. Place the battery (14).
9. Press the power switch (1) into the “
ON/1”position to start your ash cleaner.
10. The machine now is ready to use for vacuum
cleaning.
11. Press the power switch (1) into the “
OFF/0”position to switch off your ash cleaner.
Blow function (Fig. E-1, E-2, G)
Operation without the use of a filter is
recommended.
Remove all dirt and debris from the
container(7) before you use the blow
function.
Always wear safety goggles before using
the blowing function.
Risk of flying objects. Keep bystanders
away from the work area.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc VC507DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc VC507DC in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 11.61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info