764117

Vonroc VC505AC Manual

6
Zoom out
Zoom in
Previous page
1/64
Next page
6
EN
WWW.VONROC.COM
SAFETY WARNINGS SPECIFIC FOR BLOWING
a) Direct air discharge at work area only. Never at
people or animals.
b) Risk of flying objects. Keep bystanders away
from the work area.
c) Always wear safety goggles before using the
blowing function.
Electrical safety
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
Always check that the voltage of the power
supply corresponds to the voltage on the
rating plate label.
Class II machine - Double insulation – You
don’t need any earthed plug.
If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
2. MACHINE INFORMATION
Intended use
The vacuum cleaner is intended for domestic cold
ash vacuuming, for example, cleaning a fireplace,
barbeque or other ash residue. The vacuum cleaner
is equipped with a blowing function. It can be used
to blow dust and debris out of garages or of patios
and driveways. The device is not suitable for com-
mercial or industrial use.
TECHNICAL SPECIFICATIONS
Model No. VC505AC
Mains voltage 220-240V~
Mains frequency 50-60 Hz
Power input 1600W
Cable length 3m
Protection category Class II
Suction force 20 kPA, 1.6 m
3
/min
Container capacity approx. 20 L
Filter HEPA
Hose system 35mm
Hose Length 1.2m
Recommended Filter VC808AC
Weight (incl. all accessories) approx. 3.3 kg
DESCRIPTION
The numbers in the text refer to the diagrams on
pages 2-3.
1. On/Off switch
2. Carrying handle
3. Vacuum port
4. Blowing port
5. Metal locking clamp
6. Nozzles storage
7. Container
8. Top section
9. Hose
10. Aluminium tube
11. HEPA Filter
12. Filter holder
3. ASSEMBLY
Before assembly, always switch off the
machine and remove the mains plug from
the mains.
• Slide the HEPA filter (11) over the filter holder
(12) as shown in Fig. B.
Clean the HEPA filter (11) regularly and
after every heavy use to maintain the
suction power.
• Place the top section (8) on the container (7) as
shown in Fig. C1.
• Secure the metal locking clamps of the contain-
er to the top section as show in Fig. C2.
• Close the metal locking clamps by pushing
them downwards.
• Connect the suction hose (9).
- For vacuuming (Fig. D): Connect the suction
hose (9) to the vacuum port (3).
- For blowing (Fig. E): Connect the suction
hose (9) to the blowing port (4).
•
Connect the aluminum tube (10) to the hose (9).
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc VC505AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc VC505AC in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 7,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info