Manual Vonroc VC504AC (page 6 of 76) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish)

764123

Zoom out

Zoom in

1/76

WWW.VONROC.COM

cords should be modiﬁed or removed from the

machine.

20) When using the machine, it should be kept steady

and on a stable surface or supported by the body.

21) Only work in full daylight or with appropriate

artiﬁcial light.

22) We recommend using some type of hearing pro-

tection for your ears.

23) If the machine vibrates abnormally, stop the mo-

tor and look for the cause immediately. Vibrations

usually mean a problem.

24) The vacuum cleaner should be properly checked

before each use. Do not use a machine that is not

in perfect condition. If you notice a problem that

could constitute a danger to the user, have the

machine repaired before using it.

25) For safety reasons, replace worn or damaged

parts. Use only manufacturer approved replace-

ment parts. Parts from sources other than the

manufacturer may not ﬁt properly or may be

dangerous or cause injuries. The power cord can

only be replaced by specialized customer service

centers.

26) Only use the vacuum cleaner in areas that are dry

and protected from bad weather. Do not use it

outside when it is raining.

27) Store the vacuum in a dry place, out of the reach

of children.

28) Do not leave the power cord lying around once

cleanup is done; someone could trip.

29) Take care when emptying extremely heavy tanks.

30) To avoid spontaneous combustion, empty the

tank after every use.

31) Do not use this machine to vacuum up ﬂammable

or combustible liquids, such as gasoline, photo-

copier powder, or volatile substances; and do not

use the machine in areas where these liquids are

present. Do not vacuum up acids.

32) Do not vacuum up any materials that are toxic,

cancer causing, combustible, or any other

dangerous materials, such as asbestos, asbestos

dust, arsenic, barium, beryllium, lead, pesti-

cides, or any other substances hazardous to your

health.

33) Extreme caution should be used when vacuum-

ing up wood or charcoal, soot, cement, plaster, or

plasterboard dust. These particles are extremely

ﬁne and can pass through the ﬁlters affecting the

motor’s performance or be blown into the air. If

necessary, therefore we strongly recommend a

HEPA ﬁlter in combination with a dust collection

bag when cleaning these types of materials.

34) Do not vacuum up anything that is burning or

smoldering, such as cigarettes, cigarette butts,

matches, or hot ashes.

35) Never vacuum up salt water; it may destroy the

motor.

SAFETY WARNINGS SPECIFIC FOR BLOWING

a) Direct air discharge at work area only. Never at

people or animals.

b) Risk of ﬂying objects. Keep bystanders away

from the work area.

c) Always wear safety goggles before using the

blowing function.

Electrical safety

When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of ﬁre, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

Always check that the power supply

corresponds to the voltage on the rating

plate.

Connecting to the power supply

Check that the power supply and plug used in

accordance with your machine. Have a look at the

rating plate on the machine. Any changes should

always be carried out by a qualiﬁed electrician.

Warning! This machine must be earthed. If

not properly earthed this machine can

cause an electrical shock. Be sure that the

power supply outlet is earthed. If there is

any doubt, have it checked by a qualiﬁed

electrician.

Warning! Avoid contact with the terminals

on the plug when installing (removing) the

plug to (from) the power supply outlet.

Contact will cause a severe electrical shock.

Replacing cables or plugs

Immediately throw away old cables or plugs when

they have been replaced by new ones. It is dange-

rous to insert the plug of a loose cable in the wall

outlet.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc VC504AC in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 9,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vonroc VC504AC Manual

Product: