Manual Vonroc S4_LM504DC (page 15 of 128) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish)

778579

Zoom out

Zoom in

1/128

WWW.VONROC.COM

Immediately switch off the machine in the

following cases:

- whenever you leave the machine,

- before clearing blockages or unclogging

chute,

- before checking, cleaning or working on

the machine,

- after striking a foreign object. Inspect

the machine for damage and make re-

pairs before restarting and operating the

machine;

Be careful during adjustment of the

machine to prevent entrapment of the

ﬁngers between moving blades and ﬁxed

parts of the machine.

Adjusting the cutting height (Fig. A, I)

Switch off the equipment, wait for the blade

to stop and remove the battery. There is a

risk of injury.

Depending on the preferred cutting height, you

can adjust the heigh level in one of ﬁve positions.

Adjust the cutting height according to the needs of

your lawn. The cutting height depends on the kind

of lawn and its actual height. When mowing high

grass, start with the maximum cutting height and

make a second cut with a lower cutting height.

A higher cut height should always be selected for

the ﬁrst cut of the season.

1. Pull the height adjustment lever (17) outwards

(away from the machine housing) as shown on

ﬁgure I.

2. Whilst holding the height adjustment lever (17)

in outwards position, push it forward or bac-

kward to the desired cutting height.

3. Release the lever (17) and ensure it engaged in

the slot properly.

NOTE: There are 5 cutting height levels available:

30mm, 40mm, 50mm, 60mm, 70mm.

Switching the machine on/off (Fig. A, N)

Before starting, put the product on a ﬂat

surface free of high grass.

Clean the underside of the deck before

turning on the machine.

Keep your feet well away from the cutting

blade.

Do not tilt the product when starting the

motor.

1. Ensure the safety key (21) is inserted in the

designated spot underneath the battery cover

(19).

2. To start the machine, press and hold the safety

button (3) and press the on/off switch (2).

Whilst holding the on/off switch (2), you can

release pressure on the safety button (3).

3. To stop the machine, release the on/off switch

(2) and wait until cutting blade stops rotating.

Operating the mower (ﬁg. A, O)

Always ensure that a safe distance

(provided by the length of the long handles)

is maintained between the user and the

mower housing.

Be especially careful when mowing and

changing direction on slopes and inclines.

Maintain a solid footing and wear sturdy,

non-slip footwear and long trousers. Always

mow along the incline (not up and down).

For safety reasons, the lawn mower may

not be used to mow inclines whose

gradient exceeds 15 degrees.

Use special caution when backing up and

pulling the lawn mower. Tripping hazard!

Before use

• Make sure that the lawn is clear of stones,

sticks, wire or other objects that could damage

the product or its product.

• Do not cut wet grass because it tends to stick

to the underbody of the product, preventing

the proper discharge of grass clippings, and it

could also cause you to slip and fall.

• Never cut off more than one-third of the total

length of the grass for a healthy lawn. In the

autumn, lawns should only be cut as long as

there is growth.

• Slowly push the product forward, do not force.

• Mow in slight overlapping rows. The most effec-

tive hat all the lawn is cut without missing any

spots, as shown on ﬁgure O.

• Circle around ﬂower beds. When reaching a

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc S4_LM504DC in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 19.43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vonroc S4_LM504DC Manual

Product: