763972
7
Zoom out
Zoom in
Previous page
1/44
Next page
EN
7
WWW.VONROC.COM
TECHNICAL SPECIFICATIONS
Model No. S_CD502DC
Charger CD814AA
Input of charger 100-240V~ 50/60Hz
Max.0.4A
Output of charger 13.5V DC 1.3A
Rechargeable battery pack 12 V Li-ion 1.3Ah
Battery charging time 60 minutes
Chuck capacity 1.0 - 10 mm
Torque settings 17 + Drill mode
No load speed
Position 1:
Position 2:
0-350 /min
0-1300 /min
Weight (incl. battery) 1.0 kg
Sound pressure level L
PA
66.57 dB(A), K=3dB(A)
Sound power level L
WA
77.57 dB(A), K=3dB(A)
Hand-arm vibration a
h
(screwdriving without impact)
0.854 m/s
2
K=1.5 m/s
2
Hand-arm vibration a
h,D
(Drilling into metal) 2.069 m/s
2
K=1.5 m/s
2
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
with a standardized test given in EN 62841; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work patterns.
DESCRIPTION
The numbers in the text refer to the diagrams on
pages 2 - 3
Fig. A
1. Machine
2. Battery
3. Battery unlock button
4. Work light
5. Charger
6. Charger LED indicator
7. Chuck
8. Gear selection switch
9. Direction switch
10. On / off switch
11. Torque adjustment ring
3. OPERATION
The battery must be charged before first use.
Removing the battery from the machine (Fig. B)
Push the battery unlock buttons (3) and pull the
battery out of the machine like shown in Fig. B.
Inserting the battery into the machine (Fig. B)
Ensure that the exterior of the battery is
clean and dry before connecting to the
charger or machine.
Insert the battery (2) into the base of the machi-
ne as shown in Fig. B.
Push the battery further forward until it clicks
into place.
Charging the battery with the charger (Fig. C)
Plug the charger plug into an electrical outlet and
wait for a while. The LED indicator on the charger
(6) will lighten up and show the charger status.
LED indicator (6) (Fig. C)
The charger has 1 LED indicator (6) which indicates
the status of the charging process:
LED Charger status
Red Battery charging in progress
Green
Battery charging finished, battery fully charged
Fully charging the 1.3Ah battery may take up to
60 minutes.
After the battery is fully charged remove the
charger plug from the outlet and remove the
battery from the charger.
When the machine is not being used over a
longer period of time it is best to store the
battery in charged condition.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc S3-CD502DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc S3-CD502DC in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 5,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info