Manual Vonroc S-CDR03DC (page 13 of 88) (English, German, Dutch, French, Italian, Polish, Turkish, Spanish)

764218

Zoom out

Zoom in

1/88

13WWW.VONROC.COM

3. Then, slide the hose on and twist coun-

ter-clockwise to secure.

4. To remove, twist the hose clockwise and slide

hose off.

Note: Many inﬂatables have an internal ﬂap that

prevents air loss during inﬂation, especially air mat-

tresses. Unless this ﬂap is displaced by the nozzle

the inﬂatable will not inﬂate. Push the nozzle ﬁrmly

into the valve to make sure that you push this ﬂap

out of the way.

WARNING: Risk of Bursting. Excessive air pressure

may cause a hazardous risk of bursting or personal

injury. Check the manufacturer’s maximum pressu-

re rating for items being inﬂated.

For some valves you need a different size connector

then the standard size on the low pressure hose:

• Place the adapter that is connected to the low

pressure hose (11) on to the end of the hose.

• Choose between the Large, Medium or small

connectors (13).

• Check the ﬁt before attaching it to the low pressu-

re hose (11).

• Attach the chosen connector by pushing it on the

low pressure hose.

Deﬂate

Connecting the low pressure hose to the compressor

(Fig. H2)

1. Remove the low pressure hose (11) from the

storage (12).

2. Push the hose into the deﬂate connection (25)

3. Insert the hose into the object being deﬂated,

using the correct adapter

Setting the Automatic Shut-Off Pressure

During use of the low pressure mode it is not possi-

ble to use Automatic shut-off pressure.

Worklight (4) (Fig. E)

Note: While the battery is assembled on the machine

or connected with 12V cigarette plug and the machi-

ne is in sleep state, the LEDs will not turn on.

• In order to switch on the machine, press the Pres-

sure selector (21) and the display (28) will go on.

• Turn on the worklight by pressing the worklight

switch (26).

• Turn off the worklight by pressing the worklight

switch (26).

4. MAINTENANCE

Before cleaning and maintenance, always

switch off the machine and remove the

battery pack from the machine.

Clean the machine casings regularly with a soft

cloth, preferably after each use. Make sure that the

ventilation openings are free of dust and dirt. Re-

move very persistent dirt using a soft cloth moiste-

ned with soapsuds. Do not use any solvents such

as gasoline, alcohol, ammonia, etc. Chemicals such

as these will damage the synthetic components.

ENVIRONMENT

Faulty and/or discarded electrical or

electronic apparatus have to be collected at

the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic waste.

According to the European Guideline 2012/19/EC

for Waste Electrical and Electronic Equipment and its

implementation into national right, power tools that

are no longer usable must be collected separately

and disposed of in an environmentally friendly way.

WARRANTY

VONROC products are developed to the highest

quality standards and are guaranteed free of defects

in both materials and workmanship for the period

lawfully stipulated starting from the date of original

purchase. Should the product develop any failure

during this period due to defective material and/or

workmanship then contact VONROC directly.

The following circumstances are excluded from this

guarantee:

• Repairs and or alterations have been made

or attempted to the machine by unauthorized

service centers;

• Normal wear and tear;

• The tool has been abused, misused or

improperly maintained;

• Non-original spare parts have been used.

This constitutes the sole warranty made by compa-

ny either expressed or implied. There are no other

warranties expressed or implied which extend

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc S-CDR03DC in the language / languages: English, German, Dutch, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 8,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vonroc S-CDR03DC Manual

Product: