764218

Vonroc S-CDR03DC Manual

11
Zoom out
Zoom in
Previous page
1/88
Next page
EN
11WWW.VONROC.COM
4.
Plug the charger plug into an electrical outlet and
wait for a while. The LED indicators on the charger
(6) will lighten up and show the charger status.
The charger has 2 LED indicators (31) which indi-
cate
the status of the charging process:
Red LED Status Green LED status Charger status
Off Off No power
Off On
Standby mode:
- No battery is
inserted or,
- Battery inserted
but charging has
finished
On Off Battery charging in
progress
• Fully charging the 2Ah battery may take up to
60 minutes.
• Fully charging the 4Ah battery may take up to
120 minutes.
After the battery is fully charged remove the char-
ger plug from the outlet and remove the battery
from the charger.
for 12V cigarette plug use:
Storaqe for Cigarette plug (Fig. C)
The cigarette plug is stored in the bottom of the
machine.
Connecting to the cigarette lighter socket (Fig. A)
Verify the socket of the cigarette lighter in your
vehicle has an adequately sized fuse.
• Plug the cigarette lighter plug (29) into the
socket of the 12V cigarette lighter. If you are
unsure how to perform this, please consult the
manual of the vehicle.
Switching on/off the machine
• Press the Pressure selector (21) and the display
(28) will go on.
• The machine will automatically switch off after
a few miniutes or when battery / cigarette plug
is being removed or hold the Pressure selector
(21) for a few second and the display (28) will
go off.
HIGH PRESSURE, LOW VOLUME  TYRES &
BALLS  SWITCH ‘I’ FIG. D1, D2
Connecting the high pressure connection valve
without valve adapter
1. Open the connection valve (8); the clamping lever
(7) will be in position as shown on figure D1.
2. Insert the open connection valve (8) into the
valve of the inflatable (if necessary, first remove
valve cover of the inflatable).
3. Hold the connection valve (8) and close: push
clamping lever (7) towards the connection valve
(8).
Connecting the high pressure connection valve
with valve adapter
Take care not to over-inflate footballs, they
might burst.
Given the material composition of inflatable
mattresses, inflatable boats etc., the air
pressure cannot be indicated exactly. Take
care therefore not to over-inflate such
items or they might burst.
For valve adapter for balls and the extra small valve
adapter for inflatables
1. Open the connection valve (8); the clamping
lever (7) will be in position as shown on figure
D1.
2. Push or twist the respective valve adapter (14,
15) into the opening in the connection valve (8).
3. Secure the valve adapter (14, 15) by closing the
connection valve (8): push clamping lever (7)
towards the connection valve (8) as shown on
figure D2.
4. Insert the valve adapter (14, 15) into the valve
on the inflatable (if necessary, first remove
valve cover of the inflatable).
For valve adapter for tyres
1. Turn the valve adapter (16, 17, 18) on to the valve
of the tyre (if necessary, first remove valve cover
of the tyre).
2. Open the connection valve (8); the clamping lever
(7) will be in position as shown on figure D1.
3. Push the connection valve (8) on the valve
adapter (16, 17, 18)
4. Hold the connection valve (8): push clamping
lever (7) towards the connection valve (8) as
shown on figure D2.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc S-CDR03DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc S-CDR03DC in the language / languages: English, German, Dutch, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 8,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info