764058

Vonroc RT501AC Manual

11
Zoom out
Zoom in
Previous page
1/76
Next page
EN
11
WWW.VONROC.COM
that these instructions are provided to any person
who uses the machine.
- Improper maintenance of the router can lead
to uncontrollable situations. Use only sharp,
well-maintained router bits and adjust these
according to the instructions provided by the
manufacturer. Router bits may only be used
for the purpose for which they were intended.
Always use the appropriate router bit for your
application and ensure that it is in good condition
as this reduces the risk of accidents.
- Accidental contact with the router table’s moving
parts can lead to dangerous situations and/or ac-
cidents. Switch the machine off and disconnect
it from the mains when it is not in use, before
you perform any maintenance and before you
change or adjust the router bit. This precaution-
ary measure prevents the tool from being started
accidentally.
- Incorrect use of fences and other workpiece feed
devices can lead to dangerous situations. Consult
the instructions in the appropriate part of this
user manual.
- Incorrect positioning, fitting or fastening of the
router bit can lead to dangerous situations. Be
sure that the router bit rotates in the correct
direction and that the workpiece is fed into the
spindle against the direction of rotation of the bit.
- Be sure to select the correct router bit speed for
your application. Consult the manual supplied
with your electric router for this purpose.
- Keep your hands away from the workpiece by
using a fence, push stick or other feed device to
feed the workpiece towards the router bit. Use
the feather boards supplied to hold the workpie-
ce instead. This reduces the risk of injury.
- Ensure that the router table is located on a sta-
ble, level surface.
- Keep your workplace tidy and remove chips and
dust regularly. Clean your power tool’s ventilation
slots regularly.
Electrical safety
Always check that the voltage of the power
supply corresponds to the voltage on the
rating plate.
• Do not use the machine if the mains cable or
the mains plug is damaged.
• Only use extension cables that are suitable
for the power rating of the machine with a
minimum thickness of 1.5 mm2. If you use a ex-
tension cable reel, always fully unroll the cable.
2. MACHINE INFORMATION
Intended use
The router table is exclusively designed for private
use and for hobby and DIY projects for routing in
wood in conjunction with an electric router. Any
other applications are expressly prohibited and are
deemed improper use.
TECHNICAL SPECIFICATIONS
Model no. RT501AC
Voltage 230–240 V ~
Frequency 50 Hz
Current 8A max.
Table dimensions without extensions 460x335 mm
Table dimensions with extensions 870x335 mm
Table height 280 mm
Max. router bit diameter Dmax: Ø22 mm
Max. installed router weight 3.5 kg
Max. installed router power 1800 W
Max. workpiece dimensions:
Width
Length
Height
100 mm
2000 mm
55 mm
Weight 7.0 kg
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2 - 7.
1. Fence
2. Table Extension
3. Mitre Guide
4. Feather Board
5. Switch Box Outlet
6. On/Off Switch
7. Guard
8. Dust Port
9. Leg
10. Table
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc RT501AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc RT501AC in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 9,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info