Manual Vonroc RT501AC (page 9 of 76) (English, German, Dutch, French, Italian, Polish, Spanish)

764058

Zoom out

Zoom in

1/76

WWW.VONROC.COM

• Danger of injury through ﬂying workpieces

and/or uncontrolled lift-up of the workpiece

caused by improper guidance or holding of the

workpiece, such as working without the use of

a fence or feather boards,

• Health risks associated with wood dust and

wood chips. Always use personal protective

equipment such as safety goggles and a dust

mask. Use a dust extraction device,

• Danger of injury caused by long hair or loose-ﬁt-

ting clothing. Always wear tight-ﬁtting work

clothing and keep long hair in a hair net,

• Danger of injury to the hands and ﬁngers when

the router bit is changed. Wear protective gloves,

• Danger of laceration caused by the rotating

router bit when the machine is switched on,

• Danger of electric shock if the machine is con-

nected to a faulty mains system.

Despite all safety precautions taken, some hidden

risks may remain. Residual risks can be minimised

by following the safety instructions, the scope of

use and the user manual.

A. Workpiece dimensions:

- Workpieces less than 200 mm in length may

only be fed towards the router bit with the

aid of a workpiece feed device such as a

push stick.

- Workpieces greater than 1000 mm in length

must be prevented from tipping with a roller

stand.

- The maximum workpiece width of 100 mm

may not be exceeded.

B. The router table may only be used to cut square

or rectangular shaped workpieces. Do not cut

circular workpieces (such as broom handles or

branches) with the router table.

C. The router table is suitable for producing shaped

edges (proﬁles), chamfers, joints, rebates and

wood joints. The router table may not be used

for working of end grain wood or the cutting of

mortice tenons. Plunge milling, curve milling and

synchronous feed milling are not allowed. Stop-

ped work is not allowed.

D. Ensure that all protective devices are ﬁtted and in

good working order before you use the machine.

E. The router table is designed for single-person

operation. The operator is responsible for the

safety of others in the vicinity.

F. Read and follow all safety instructions printed

on the machine. A copy of the safety instructions

printed on the machine is contained in this user

manual.

G. If the dimensions of your workpiece exceed the

dimensions of the work table, the side tables

must be used.

H. The router table must always be connected to a

dust extraction device.

I. Use the machine when it is in good working order

for the purpose for which it was designed and ac-

cording to the instructions contained in this user

manual and the manual supplied with the electric

router you use with the router table. Consider the

potential dangers associated with the use of the

machine. Any defects which may affect the safety

of the machine must be repaired immediately.

J. The manufacturer’s safety, working and main-

tenance instructions and the dimensions in the

technical speciﬁcations must be followed careful-

ly.

K. The applicable health and safety regulations and

generally accepted technical safety rules must be

followed.

L. The router table may only be operated, main-

tained and repaired by competent persons who

are familiar with this type of machine and the

potential dangers. The manufacturer accepts no

responsibility for damage caused by modiﬁcations

to the machine.

M. The machine may only be used with the original

accessories and tools supplied by the manu-

facturer. Be aware that the use of accessories

or tools other than those speciﬁed in the user

manual can lead to injury.

N. Use a push stick to hold / guide the workpiece.

This is much safer than using your hands and

means that you have both hands free to operate

the machine.

O. Always maintain a stable posture, keep your

balance and do not lean too far forward. Avoid

unusual body positions.

P. Always maintain concentration when working with

the machine. Do not work with the machine when

you are tired or under the inﬂuence of alcohol,

medication or drugs.

Q. Check the machine for damaged parts. If a pro-

tective device or another part appears damaged,

carefully check to see if the part still functions be-

fore resuming work. Check that all moving parts

can move back and forth freely and clear their

way if necessary. Ensure that no breakage, cracks

or other types of damage affect their function.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc RT501AC in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 9,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vonroc RT501AC Manual

Product: