Manual Vonroc RS502AC (page 8 of 28) (English, German, Dutch, French)

764105

Zoom out

Zoom in

1/28

WWW.VONROC.COM

Adjusting the main handle (Fig. A, F)

Before starting operation you can adjust the main

handle (1) to the position most comfortable for the

task. The handle can be set up in 5 positions within

180° rotation range in long axis of the tool body

(90° left or right from the base position).

1. Move the handle unlock button (4) back.

2. Rotate the main handle around long axis of the

tool to desired position (ﬁg. F).

3. The main handle automatically locks in desired

position.

Optimum use

• Adjust saw blade and stroke rate to suit the ma-

terial to be processed. For right radius curves it

is best to use a narrow saw blade. Apply coolant

or lubricant to deal with the ﬂuttering produced

along the cut line when sawing metal.

• Check wood, chip boards, building materials

etc, for hard materials (nails, screws etc.), befo-

re sawing and remove them, if necessary.

•

Clamp material well. Do not support the workpie-

ce with hand or foot. Do not touch objects or the

ﬂoor with the saw running (danger of backlash).

• Put the footplate on the surface of the

workpiece, and saw through it with constant

contact pressure or feed. If the saw blade

seizes switch the machine off immediately.

Spread the gap with a suitable tool and pull out

the saw blade.

• After ﬁnishing work, switch off the machine and

only put down after it has come to a complete

standstill.

5. MAINTENANCE

Before cleaning and maintenance, always

switch off the machine and remove the

battery pack from the machine.

Clean the machine casings regularly with a soft

cloth, preferably after each use. Make sure that the

ventilation openings are free of dust and dirt. Re-

move very persistent dirt using a soft cloth moiste-

ned with soapsuds. Do not use any solvents such

as gasoline, alcohol, ammonia, etc. Chemicals such

as these will damage the synthetic components.

ENVIRONMENT

Faulty and/or discarded electrical or

electronic apparatus have to be collected at

the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic waste.

According to the European Guideline 2012/19/EC

for Waste Electrical and Electronic Equipment and its

implementation into national right, power tools that

are no longer usable must be collected separately

and disposed of in an environmentally friendly way.

WARRANTY

VONROC products are developed to the highest

quality standards and are guaranteed free of defects

in both materials and workmanship for the period

lawfully stipulated starting from the date of original

purchase. Should the product develop any failure

during this period due to defective material and/or

workmanship then contact VONROC directly.

The following circumstances are excluded from this

guarantee:

• Repairs and or alterations have been made

or attempted to the machine by unauthorized

service centers;

• Normal wear and tear;

• The tool has been abused, misused or

improperly maintained;

• Non-original spare parts have been used.

This constitutes the sole warranty made by compa-

ny either expressed or implied. There are no other

warranties expressed or implied which extend

beyond the face hereof, herein, including the im-

plied warranties of merchantability and ﬁtness for

a particular purpose. In no event shall VONROC be

liable for any incidental or consequential damages.

The dealers remedies shall be limited to repair or

replacement of nonconforming units or parts.

The product and the user manual are subject to chan-

ge. Speciﬁcations can be changed without further

notice.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc RS502AC in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vonroc RS502AC Manual

Product: