Manual Vonroc PM506DC (page 9 of 84) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish)

778565

Zoom out

Zoom in

1/84

WWW.VONROC.COM

Removing the whisk

1. Loosen the assembled whisk using the supplied

spanners (10). To do so, hold the tool holder (4)

using one of the supplied spanners (10), and

use the second spanner to loosen the assemb-

led whisk.

2. Unscrew the whisk from the tool holder (4) in

anti-clockwise direction.

4. OPERATION

Switching on and off (Fig. B)

The on/off switch (7) is used for activating the

machine and adjusting speed.

• To start the machine, press and hold the lock off

button (8) and press the on/off switch (7).

•

To stop the machine, release the on/off switch (7).

Speed adjustment (Fig. B)

The required speed can be adjusted by using the

Speed adjustment wheel (9). Also during operation

the rotational speed can be adjusted.

•

To increase the speed, turn the Speed adjustment

knob (9) clockwise.

•

To decrease the speed, turn the Speed adjustment

knob (9) anti-clockwise.

The required speeds depends on the material and

can be determined by practical testing.

Optimum use

• For materials with low viscosity, e.g. emulsion

paint, varnishes, adhesive, grouting compound

and cement slurry, a stirrer whisk with a so-cal-

led left-hand spiral is recommended for opti-

mum use. With a left-hand spiral, the material is

moved from the top downwards and the stirrer

whisk is pushed upwards. Materials with low

viscosity are mixed in a way which minimises

splattering, so a low speed is recommended.

• For materials with high viscosity, e.g. plaster,

concrete, cement, screed, ﬁller and epoxy resin,

a stirrer whisk with a so-called right-hand spiral

is recommended for optimum use. With a right-

-hand spiral, the material is moved from the

bottom upwards and the stirrer whisk is pulled

downwards (working its way into the mixture).

Materials with high viscosity are mixed thoroug-

hly, so a high speed is recommended.

• For optimum results, move the power tool in an

up and down motion while mixing.

• It is recommended to clean the whisk after use,

for example by stirring the whisk in a bucket

ﬁlled with water.

5. MAINTENANCE

Before cleaning and maintenance, always

switch off the machine and remove the

battery pack from the machine.

Clean the machine casings regularly with a soft

cloth, preferably after each use. Make sure that the

ventilation openings (3) are free of dust and dirt.

Remove very persistent dirt using a soft cloth moi-

stened with soapsuds. Do not use any solvents such

as gasoline, alcohol, ammonia, etc. Chemicals such

as these will damage the synthetic components.

ENVIRONMENT

Faulty and/or discarded electrical or

electronic apparatus have to be collected at

the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic waste.

According to the European Guideline 2012/19/EC

for Waste Electrical and Electronic Equipment and its

implementation into national right, power tools that

are no longer usable must be collected separately

and disposed of in an environmentally friendly way.

WARRANTY

VONROC products are developed to the highest

quality standards and are guaranteed free of

defects in both materials and workmanship for the

period lawfully stipulated starting from the date of

original purchase. Should the product develop any

failure during this period due to defective material

and/or workmanship then contact VONROC directly.

The following circumstances are excluded from this

guarantee:

• Repairs and or alterations have been made

or attempted to the machine by unauthorized

service centers;

• Normal wear and tear;

• The tool has been abused, misused or

improperly maintained;

• Non-original spare parts have been used.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc PM506DC in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 7.58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vonroc PM506DC Manual

Product: