Manual Vonroc PM506DC (page 8 of 84) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish)

778565

Zoom out

Zoom in

1/84

WWW.VONROC.COM

3. ASSEMBLY

Before any work on the power tool, remove

the battery.

The battery must be charged before ﬁrst

use.

Inserting the battery into the machine (Fig. D)

Ensure that the exterior of the battery is

clean and dry before connecting to the

charger or machine.

1. Insert the battery (11) into the base of the ma-

chine like shown in Fig. D.

2. Push the battery further forward until it clicks

into place.

Removing the battery from the machine (Fig. D)

1. Push the battery unlock button (12).

2. Pull the battery out of the machine like shown

in Fig. D.

Checking the battery charging status (Fig. E)

• To check the battery charge status, push the

button (13) on battery shortly.

• The battery has 3 lights indicating the charge

level, the more lights that burn, the more charge

the battery has left.

• When the lights are not burning it means the bat-

tery is empty and must be charged immediately.

Charging the battery with the charger (Fig. E)

1. Take the battery (11) from the machine.

2. Turn the battery (11) to upside down position

and slide it onto the charger (15) as shown in

Fig. E.

3. Push the battery until it is fully pushed into the

slot.

4. Plug the charger plug into an electrical outlet

and wait for a while. The LED indicators on the

charger (14) will lighten up and show the char-

ger status.

The charger has 2 LED indicators (16) which indi-

cate the status of the charging process:

Red LED Status Green LED status Charger status

Off Off No power

Off On

Standby mode:

- No battery is

inserted or,

- Battery inserted

but charging has

ﬁnished

On Off Battery charging in

progress

• Fully charging the 2Ah battery may take up to

60 minutes.

• Fully charging the 4Ah battery may take up to

120 minutes.

After the battery is fully charged remove the char-

ger plug from the outlet and remove the battery

from the charger.

When the machine is not being used over a

longer period of time it is best to store the

battery in charged condition.

Assembling the two-part whisk (Fig. A)

1. Screw the Whisk shaft (5) onto the Whisk pad-

dle (6)

2. Tighten both parts securely

Replacing the whisk (Fig. C)

Always remove the battery before mounting

an accessory.

Use only whisks conform the speciﬁed diameter.

Always use a whisk that is suitable for the material

to be mixed/stirred. Using an unsuitable mixer bar

can unnecessarily overload both the machine and

yourself.

Mounting the whisk

1. Screw the assembled whisk into the tool holder

(4) in clockwise direction as far as possible.

2. Tighten the whisk into the tool holder using the

supplied spanners (10). To do so, hold the tool

holder (4) using one of the supplied spanners,

and use the second spanner to tighten the

assembled whisk.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc PM506DC in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 7.58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vonroc PM506DC Manual

Product: