Manual Vonroc PM503AC (page 6 of 36) (English, German, Dutch, French, Italian, Spanish)

764130

Zoom out

Zoom in

1/36

WWW.VONROC.COM

• The times when the tool is switched off or when

it is running but not actually doing the job, may

signiﬁcantly reduce the exposure level.

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work patterns.

DESCRIPTION

The numbers in the text refer to the diagrams on

page 2.

1. On/off switch

2. Lock-on button

3. Speed adjustment wheel

5. Tool holder

6. Handle

7. Ventilation apertures

8. Whisk shaft

9. Whisk paddle

3. ASSEMBLY

Assembling the two-part whisk (Fig. A)

1. Screw the Whisk shaft (8) onto the Whisk pad-

dle (9)

2. Tighten both parts securely

Replacing the whisk (Fig. A)

Before assembly, always switch off the

machine and remove the mains plug from

the mains.

Use only whisks conform the speciﬁed diameter.

Always use a whisk that is suitable for the material

to be mixed/stirred. Using an unsuitable mixer bar

can unnecessarily overload both the machine and

yourself.

Mounting the whisk

1. Screw the assembled whisk into the tool holder

(5) in clockwise direction as far as possible.

2. Tighten the whisk into the tool holder using

the supplied spanners. To do so, hold the tool

holder (5) using one of the supplied spanners,

and use the second spanner to tighten the

assembled whisk.

Removing the whisk

1. Loosen the assembled whisk using the supplied

spanners. To do so, hold the tool holder (5)

using one of the supplied spanners, and use the

second spanner to loosen the assembled whisk.

2. Unscrew the whisk from the tool holder (5) in

anti-clockwise direction.

4. OPERATION

Switching on and off (Fig. A)

• To switch on the tool, press and hold the on/off

switch (1).

• If you release the on/off switch, the tool will be

switched off.

You can lock the on/off switch by pressing the

on/off switch (1) and then button (3). The switch

lock can be released by brieﬂy pressing the on/off

switch.

Speed adjustment (Fig. B)

The required speed can be adjusted by using the

Speed adjustment wheel (3). Also during operation

the rotational speed can be adjusted.

•

To increase the speed, turn the Speed adjustment

knob (3) clockwise.

• To decrease the speed, turn the Speed adjustment

knob (3) anti-clockwise.

The required speeds depends on the material

and can be determined by practical testing.

Optimum use

• For materials with low viscosity, e.g. emulsion

paint, varnishes, adhesive, grouting compound

and cement slurry, a stirrer whisk with a so-cal-

led left-hand spiral is recommended for opti-

mum use. With a left-hand spiral, the material is

moved from the top downwards and the stirrer

whisk is pushed upwards. Materials with low

viscosity are mixed in a way which minimises

splattering, so a low speed is recommended.

• For materials with high viscosity, e.g. plaster,

concrete, cement, screed, ﬁller and epoxy resin,

a stirrer whisk with a so-called right-hand spiral

is recommended for optimum use. With a right-

hand spiral, the material is moved from the

bottom upwards and the stirrer whisk is pulled

downwards (working its way into the mixture).

Materials with high viscosity are mixed thoroug-

hly, so a high speed is recommended.

• For optimum results, move the power tool in an

up and down motion while mixing.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc PM503AC in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vonroc PM503AC Manual

Product: