764130

Vonroc PM503AC Manual

5
Zoom out
Zoom in
Previous page
1/36
Next page
EN
5
WWW.VONROC.COM
parts. This will ensure that the safety of the
power tool is maintained.
b)
Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
ADDITIONAL SAFETY INSTRUCTIONS
• Firmly tighten the mixing paddle, and remove
the spanner before starting the machine.
• Do not use the power tool for explosive
materials (e. g., easily inflammable solvents).
Power tools produce sparks which could ignite
developing vapours.
•
In case the power tool should fall into the material
to be stirred, pull the plug immediately and have
the power tool checked by an after-sales service
agent. Material that has penetrated the power tool
can cause damage and lead to an electric shock.
•
Hold the machine firmly with both hands by the
insulated gripping surfaces while working and
keep proper footing and balance at all times.
The machine is more securely guided with both
hands. Loss of control can cause personal injury.
•
Hold power tool by insulated gripping surfaces,
when performing an operation where the acces-
sory may contact hidden wiring or its own cord.
The accessory contacting a “live” wire may make
exposed metal parts of the power tool “live” and
could give the operator an electric shock.
• Switch off the power tool immediately when the
tool insert jams. Be prepared for high reaction
torque that can cause kickback. The tool insert
jams when:
- the power tool is subject to overload or
- it becomes wedged in the workpiece.
•
Do not mix food. Power tools and their accessories
are not designed for processing food.
• Keep the cord away from the working area.
The cord may be entangled by the stirrer whisk.
•
The mixing container must be suitable for mixing
and must stand securely. A container that is not
properly secured may move uncontrolled.
• Ensure that no liquid splashes against the
housing of the power tool. Liquid that has
penetrated the power tool can cause damage
and lead to electric shock.
•
Follow the instructions and warnings in the Mate-
rial Safety Data Sheets (MSDS) of the material to
be mixed. Material to be mixed may be harmful.
• In the event of a power interruption, release the
locking switch by pressing the on/off switch.
This will prevent the power tool from restarting
unintentionally (risk of injury).
• Do not use the power tool in a stand.
Electrical safety
Always check that the voltage of the power
supply corresponds to the voltage on the
rating plate label.
• Do not use the machine if the mains cable or the
mains plug is damaged.
• Only use extension cables that are suitable for
the power rating of the machine with a minimum
thickness of 1.5 mm
2
. If you use an extension
cable reel, always fully unroll the cable.
2. MACHINE INFORMATION
Intended use
The machine is intended for mixing pulverised buil-
ding materials such as mortar, plaster, adhesives,
as well as solvent free paint, varnish and similar
substances. Improper use may damage the tool.
TECHNICAL SPECIFICATIONS
Model No. PM503AC
Voltage 230V ~
Frequency 50Hz
Power input 1200W
No-load speed 240-850/min
Tool mount M14
Whisk Ø 120mm
Weight 4.45 kg
Sound pressure level L
PA
85.4+3 dB(A)
Acoustic power level L
WA
96.4+3 dB(A)
Vibration
2.272+1.5 m/s
2
Vibration level
The vibration emission level stated in this instruction
manual has been measured in accordance with a
standardized test given in EN60745; it may be used to
compare one tool with another and as a preliminary
assessment of exposure to vibration
when using
the tool for the applications mentioned.
• Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc PM503AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc PM503AC in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info