Manual Vonroc MS805AA (page 6 of 48) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish)

778564

Zoom out

Zoom in

1/48

WWW.VONROC.COM

The universal tool stand is also designed as a work-

piece support when working with mitre saws, scroll

saws, circular table saws, and other similar electric

power tools. The maximum workpiece length is

3m. Additional workpiece supports may have to be

used (e.g. a roller trestle) in order to prevent longer

workpieces tilting. Attention: Ensure that the work-

piece support is secure and not tilted!

TECHNICAL SPECIFICATIONS

Model No. MS805AA

Max. permissible load 150kg

Opened dimensions

L: 935-1945mm

W: 640mm

H: 825-935mm

Closed dimensions

L: 984mm

W: 415mm

H: 224mm

Weight 24.9 kg

DESCRIPTION

The numbers in the following text refer to the pic-

tures on pages 2-4.

1. Roller

2. Workpiece support

3. Workpiece support knob

4. Extension arm

5. End stop

6. Extension arm knob

7. Mitre saw mounting bar

8. Carrying handle

9. Frame

10. Pin slot

11. Spring-loaded pin

12. Leg

13. Foot

14. Mounting bar lever

15. Mitre saw mounting hardware (bolts, washers,

spring washers, nuts)

3. ASSEMBLY

Study each ﬁgure and identify the

components required with reference to the

contents table above.

Unfolding The Stand (ﬁg. A)

1. Lay the mitre saw stand on the ﬂoor with the

folded legs (12) facing upwards.

2. Depress the spring-loaded pin (11) and unfold

the two upper legs (12) until the spring-loaded

pin (11) clicks into the pin slot (10).

3. Repeat the same procedure for the other two

legs.

4. Lift the stand and ﬂip it into the upright position.

5. Check that the stand is stable and all of the leg

locking pins have engaged properly.

Folding The Stand

One pair of legs on the stand must fold ﬁrstly for the

stand to fold ﬂat. The legs have not folded into place

if the spring-loaded pins (11) do not pop into place.

The legs should not swing about when the stand is

picked up if the legs have locked into position.

1. Turn the mitre saw stand upside down on the

ﬂoor with the legs (12) sticking up.

2. Depress the spring-loaded pin (11) on the lower

pair of legs and fold them in.

3. Repeat the same procedure on the other pair of

legs.

Attaching The Extension Arms (Fig. B)

1. Slide the extension arm (4) into the frame (9)

until the desired length is reached.

2. Now insert a extension arm knob (6) into the

corresponding hole on the frame turn it clock-

wise to secure the extension arm (4) in place,

as shown on ﬁgure B.

3. Insert a workpiece support (2) into the collar

on the extension arm (4). The side with the end

stop (5) should be facing inwards towards the

centre of the stand.

4. Insert a workpiece support knob (3) into the ex-

tension arm (4) and turn it clockwise to tighten

the workpiece support (2) into place.

5. Repeat the same procedure with the opposite

extension arm.

Attaching the mitre saw mounting bars (Fig. C)

Only use a mitre saw that has four ﬁxing

holes (one in each corner of the base) on

this stand. If the mitre saw does not meet

this requirement, do not use it with this

stand as the mitre saw cannot be properly

secured. Failure to follow this direction may

result in damage to property and/or

personal injury.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc MS805AA in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 5.28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vonroc MS805AA Manual

Product: