Manual Vonroc JS503AC (page 8 of 48) (English, German, Dutch, French, Italian, Polish, Spanish)

764100

Zoom out

Zoom in

1/48

WWW.VONROC.COM

The required pendulum action can be determined

by practical testing, although the following

instructions can be observed:

• Soft material (wood, plastics etc.): set the pen-

dulum to level II or III. For a ﬁner and cleaner

saw cut, use pendulum level 0 or I.

• Thin material, use pendulum level 0.

• Hard material (hardwood, steel etc.): set the

pendulum to level 0.

• Curves: set pendulum to level 0.

Dust extraction (Fig. E)

• Connect the hose of a vacuum cleaner to the

dust extraction adapter (8).

Note: the dust blow function must be de-activated

when using a vacuum cleaner.

Dust blow function (Fig. G)

The cutting line can be kept clear of chips and

debris by using the dust blow function.

• To activate the dust blow function, move the

dust blower switch (2) to the right, as shown on

ﬁgure G1.

• To de-activate the dust blow function, move the

dust blower switch (2) to the left, as shown on

ﬁgure G2.

Optimum use

• Clamp the workpiece. Use a clamping device for

small workpieces.

• Draw a line to deﬁne the direction in which to

guide the saw blade.

• Firmly hold the machine by the grip.

• Set the sawing speed.

• Set the mitre angle.

• Switch on the machine.

• Wait until the machine has reached full speed.

• Place the saw shoe on the workpiece.

• Slowly move the machine along the pre-drawn

line, ﬁrmly pressing the saw shoe against the

workpiece.

• Do not apply too much pressure on the machi-

ne. Let the machine do the work.

• Switch off the machine and wait for the ma-

chine to come to a complete standstill before

putting the machine down.

5. MAINTENANCE

Before cleaning and maintenance, always

switch off the machine and remove the

mains plug from the mains.

Clean the machine casings regularly with a soft

cloth, preferably after each use. Make sure that

the ventilation openings are free of dust and

dirt. Remove very persistent dirt using a soft

cloth moistened with soapsuds. Do not use any

solvents such as gasoline, alcohol, ammonia,

etc. Chemicals such as these will damage the

synthetic components.

ENVIRONMENT

Faulty and/or discarded electrical or

electronic apparatus have to be collected

at the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic waste.

According to the European Guideline 2012/19/

EC for Waste Electrical and Electronic Equipment

and its implementation into national right, power

tools that are no longer usable must be collected

separately and disposed of in an environmentally

friendly way.

WARRANTY

VONROC products are developed to the highest

quality standards and are guaranteed free of defects

in both materials and workmanship for the period

lawfully stipulated starting from the date of original

purchase. Should the product develop any failure

during this period due to defective material and/or

workmanship then contact VONROC directly.

The following circumstances are excluded from this

guarantee:

• Repairs and or alterations have been made

or attempted to the machine by unauthorized

service centers;

• Normal wear and tear;

• The tool has been abused, misused or

improperly maintained;

• Non-original spare parts have been used.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc JS503AC in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vonroc JS503AC Manual

Product: