764099

Vonroc JS502AC Manual

7
Zoom out
Zoom in
Previous page
1/28
Next page
EN
7
WWW.VONROC.COM
3. Speed adjustment wheel
4. Guard
5. Saw blade holder
6. Saw blade guide roller
7. Base plate
8. Hex key
9. Hex key holder
10. Dust extraction connection
11. Dust adapter
12. Grip
3. ASSEMBLY
Before assembly, always switch off the
machine and remove the mains plug from
the mains.
Mounting and removing the saw blade
Refer to the table below to select the required saw
blade.
Saw blade Material
Coarse Wood
Medium Wood
Fine Steel, aluminium, plastic
Very fine Wood (curves)
Remove the guard from the machine to change the
saw blade.
Always saw with guard.
Fitting a saw blade (Fig. B)
The machine is equipped with a quick blade ex-
change system.
• Turn the clamping ring (13) of the saw blade
holder (5) completely to the left, in order to
open up the holder.
• Insert the saw blade (15) in the saw blade hol-
der (5) as far as possible. The teeth of the saw
blade (15) must point upward and forward. The
smooth side of the saw blade must engage in
the slot of the guide roller (6).
•
Release the clamping ring (13) to close the holder.
• Make sure when changing the saw blade that
the blade holder (5) is free of material debris
(such as splinters of wood or metal).
• Before use, always check that the saw blade is
securely fixed.
Removing the saw blade
• Turn the clamping ring (13) of the saw blade
holder (5) completely to the left, in order to
open up the holder.
• Remove the saw blade from its holder.
• Release the clamping ring (13) to close the
holder.
4. OPERATION
Switching on and off (Fig. C)
• To switch on the machine, press the on/off
switch (1).
• To switch the machine to continuous mode,
keep the on/off switch (1) pressed and simulta-
neously press the lock-on button (2).
• To switch off continuous mode, press the on/
off switch (1) again.
• To switch off the machine, release the on/off
switch (1).
Setting the speed (Fig. C)
The speed adjustment wheel (3) is used for setting
the speed. The ideal speed depends on the profile
and the teeth of the saw blade and on the material
to be worked.
Do not set the speed during use.
• Turn the speed adjustment wheel (3) to the
required position.
- For hard materials, use a saw blade with
fine teeth and select a lower speed.
- For soft materials, use a saw blade with
coarse teeth and select a higher speed.
Setting the mitre angle (Fig. D)
The mitre angle is variable between 0° and 45°.
The mitre angle can be read from the scale.
Do not set the mitre angle during use.
• Slacken the Hex screws(14) using the Hex
key(8).
• Tilt the Base plate (7) to the required position.
• Tighten the Hex screws(14) using the Hex
key(8).
Dust extraction (Fig. E)
• Insert the dust extraction adapter (11) into the
dust extraction connection (10).
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc JS502AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc JS502AC in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info