764099
6
Zoom out
Zoom in
Previous page
1/28
Next page
6
EN
WWW.VONROC.COM
Only use saw blades that are suitable for use
with the machine.
Only use saw blades with the correct dimensions.
Do not use other accessories than saw blades.
Do not use saw blades made of HSS steel.
Do not use the machine on workpieces requi-
ring a maximum sawing depth that exceeds the
maximum sawing depth of the saw blade.
Hold the machine by the insulated gripping
surfaces where the saw blade may contact hid-
den wiring or the mains cable. If the saw blade
contacts a ‘live‘ wire, the exposed metal parts
of the machine can also become ‘live‘. Risk of
electric shock.
Let the machine run at no load in a safe area
after mounting the saw blade. If the machine
vibrates strongly, immediately switch off the
machine, remove the mains plug from the
mains, and try to solve the problem.
Beware that the saw blade continues to rotate
for a short period after switching off the machi-
ne. Do not attempt to bring the saw blade to a
standstill yourself.
Kickback
Kickback is the upward and backward movement
of the saw blade when the saw blade unexpectedly
touches an object. Securely hold the machine during
use. Keep your attention focused on the operation.
Kickback is usually caused by:
- unintentionally touching hard objects or
materials with the rotating saw blade;
- a blunt saw blade;
- a saw blade that is not properly mounted;
- sawing into a previous cut;
- a lack of attention to the operation;
- an instable stance.
Electrical safety
Always check that the voltage of the power
supply corresponds to the voltage on the
rating plate.
Do not use the machine if the mains cable or
the mains plug is damaged.
Only use extension cables that are suitable
for the power rating of the machine with a
minimum thickness of 1.5 mm2. If you use an
extension cable reel, always fully unroll the
cable.
2. MACHINE INFORMATION
Intended use
Your jigsaw has been designed for sawing wood,
metal, plastics, ceramics, rubber, etc. to any requi-
red size and in any required shape.
TECHNICAL SPECIFICATIONS
Model No. JS502AC
Voltage 230-240 V~
Frequency 50Hz
Power 550 W
No load speed 0 - 3.000/min
Max. sawing depth (wood) 65 mm
Mitre angle - 45 to 45°
Sound pressure (Lpa) 85 dB(A) K=3dB
Acoustic power (Lwa) 96 dB(A) K=3dB
Vibration (wood) 11.71 m/s
2
K=1.5 m/s
2
Vibration (metal)
8.81 m/s
2
K=1.5 m/s
2
Wear hearing protection.
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
with a standardized test given in EN60745; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work patterns.
DESCRIPTION
The numbers in the text refer to the diagrams on
pages 2 - 3
Fig. A
1. On/off switch
2. Lock-on button
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc JS502AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc JS502AC in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info