778543

Vonroc ID501AC Manual

5
Zoom out
Zoom in
Previous page
1/28
Next page
EN
5
WWW.VONROC.COM
Electrical safety
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
Always check that the power supply
corre sponds to the voltage on the rating plate.
Class II machine - Double insulation -
You don’t need any earthed plug
If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk
of electric shock.
2. MACHINE INFORMATION
Intended use
Your impact drill has been designed for drilling
holes in wood, metal and plastics and for hammer
drilling in brick and concrete.
TECHNICAL SPECIFICATIONS
Model No. ID501AC
Mains voltage 230-240 V~
Mains frequency 50 Hz
Power input 500W
No-load speed 0-3.000/min
Impact rate 0-48.000/min
Chuck size 2-13 mm
Max. drill diameter Wood
Concrete
Steel
25 mm
10 mm
10 mm
Weight 1.5 kg
Sound pressure level L
PA
78 + 3 dB(A)
Sound power level L
WA
89 + 3 dB(A)
Drilling into metal, a
h,D
2.93 + 1.5 m/s
2
Impact drilling into concrete,
a
h,ID
8.07 + 1.5 m/s
2
Vibration level
The vibration emission level stated in this instruction
manual has been measured in accordance with
a standardized test given in EN60745; it may be
used to compare one tool with another and as a
preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
• Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
• The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work patterns.
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2.
Fig. A
1. Chuck
2. Function selection switch
3. Depth stop
4. Lock-on button
5. On/Off switch
6. Speed adjustment wheel
7. Left/right rotation switch
8. Side handle
9. Knob
Fig. B
10. Rear sleeve
11. Front sleeve
3. ASSEMBLY
Mounting and removing the auxiliary grip (Fig. A)
Mounting
• Loosen the auxiliary grip (9).
• Slide the auxiliary grip (8) over the chuck (1).
•
Turn the auxiliary grip (8) to the required position.
• Tighten the auxiliary grip (9).
Removing
• Loosen the auxiliary grip (9).
•
Remove the auxiliary grip (8) from the chuck (1).
• Tighten the auxiliary grip (9).
Exchanging and removing drill bits (Fig. A - B)
The machine is suitable for use of the following
drill bits:
• Wood (HSS)
• Metal (HSS)
• Concrete / masonry (hard metal)
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc ID501AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc ID501AC in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info