Manual Vonroc HT501DC (page 8 of 52) (English, German, Dutch, French, Italian, Polish, Spanish)

764181

Zoom out

Zoom in

1/52

WWW.VONROC.COM

Inserting the battery into the machine (Fig. A, D)

Ensure that the exterior of the battery is

clean and dry before connecting to the

charger or machine.

Insert the battery (2) into the base of the machine

as shown in Fig. D.

2. Push the battery further forward until it clicks

into place.

Removing the battery from the machine (Fig. A, D)

1. Push the battery unlock button (3)

2. Pull the battery out of the machine like shown

in Fig. D.

4. OPERATION

Before using, always visually inspect to see

that the blades, blade bolts and cutter

assembly are not worn or damaged.

You may not use the hedge trimmer without

the protection guard.

Always use both hands to hold the hedge trim-

mer and keep it away from your own body.

Using your hedge trimmer

• For your own safety and for best results read

the following user advice and do not use this

product for anything other than its intended

purpose.

• This hedge trimmer is made for cutting hedges

and bushes. All other use that is not speciﬁcally

allowed in this manual mat lead to manage to

the hedge trimmer or injury to the user.

Switching on and off (Fig. A)

•

To switch the trimmer on, press the safety switch

(7) and the start switch (1) at the same time.

• To switch off, release one or both switches.

Trimming a hedge - best method

• Apart from hedges the hedge trimmer may also

be used for cutting bushes.

• The best cutting effect is achieved when hol-

ding the blade at an angle to the of approx. 15°.

• The opposite rotating knives cut on both sides,

and it is therefore possible to trim the hedge in

both directions.

•

The side of the hedge are trimmed using curved

shaped movements from the bottom and upwards.

• Ideally a hedge should be wider at the bottom

than the top. This will improve light penetration,

keeping the hedge healthy. If possible, trim

both sides of the hedge.

• When trimming the sides of the hedge, trim

from the bottom upwards. This will ensure there

are no hedge trimmings obscuring or interfering

with your cut strokes. The blade should not be

forced to cut too deep. Cut lightly through the

surface of the hedge.

• When trimming the top of the hedge, trim away

from you but do not over-reach. It is much wiser

and safer to move along and cut within your

reach remaining on two feet at all times.

Safety transport

The hedge trimmer has a transport protection

Cover (8) for save transportation of the machine.

5. MAINTENANCE

Before cleaning and maintenance, always

switch off the machine and remove the

battery pack from the machine.

Clean the machine casings regularly with a soft

cloth, preferably after each use. Make sure that the

ventilation openings are free of dust and dirt. Re-

move very persistent dirt using a soft cloth moiste-

ned with soapsuds. Do not use any solvents such

as gasoline, alcohol, ammonia, etc. Chemicals such

as these will damage the synthetic components.

Cutting blade

• Always wear gloves when handling or cleaning

the cutting blade.

• Clean the cutting blade and spray with a

protective oil after every use. We recommend

lubricating the cutting blade with protective oil

at regular intervals during long working periods.

• Visually inspect the condition of the cutting

blade Check that the screws are ﬁrmly seated in

the cutter bar.

• Ensure that the blade guard is ﬁtted on the

machine.

Storage

The hedge trimmer should be kept in a safe, dry

place, well out of the reach of children. Do not

place other objects on top of it.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc HT501DC in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 5,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vonroc HT501DC Manual

Product: