764181
7
Zoom out
Zoom in
Previous page
1/52
Next page
EN
7WWW.VONROC.COM
ADDITIONAL SAFETY WARNINGS FOR
CORDLESS HEDGE TRIMMER
Do not charge hedge trimmer in rain, or in wet
locations.
Do not use battery-operated hedge trimmer in
rain.
Remove or disconnect battery before servicing,
cleaning, or removing material from the hedge
trimmer.
Do not dispose of the battery(ies) in a fire. The
cell may explode. Check with local codes for
possible special disposal instructions.
2. MACHINE INFORMATION
Intended use
This hedge trimmer is only intended for cutting
branches from shrubs, bushes, ornamental plants
and hedges.
TECHNICAL SPECIFICATIONS
Model No. HT501DC
Rated voltage 20V
No load speed 1.400/min.
Cutting length 510mm
Cutting width 14mm
Weight 2.15 kg
Sound pressure level L
PA
79.1 dB (A), KpA=3 dB (A)
Sound power level L
WA
90.1 dB (A), KwA=3 dB (A)
Vibration value 1.937 m/s
2
K=1.5 m/s
2
Only use the following batteries of the VONROC VPO-
WER 20V battery platform. Using any other batteries
could cause serious injury or damage the tool.
CD801AA 20V, 2Ah Lithium-Ion
CD803AA 20V, 4Ah Lithium-Ion
The following charger of the can be used to charge
these batteries.
CD802AA Quick charger
The batteries of the VONROC VPOWER 20V battery
platform are interchangeable with all the VONROC
VPOWER 20V battery platform tools.
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
with a standardized test given in EN60745; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work patterns.
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-3.
1. On/Off button
2. Battery (not included)
3. Battery unlock button
4. Cutting blade
5. Protection guard
6. Front handle
7. Safety switch
8. Transport protection
3. ASSEMBLY
Before any work on the power tool, remove
the battery.
The battery must be charged before first
use.
Mounting the front handle (Fig. B)
1. Put the front handle (6) on the machine, as
shown on figure B.
2. Mount the front handle (6) by tightening the
four screws.
Mounting the protection guard (Fig. C)
You may not use the hedge trimmer without
the protection guard
1. Put the protection guard (5) on the machine, as
shown on figure C.
2. Mount the protection guard (5) by tightening
the two screws.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc HT501DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc HT501DC in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 5,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info