Manual Vonroc HA502AC (page 7 of 56) (English, German, Dutch, French, Italian, Polish, Spanish)

764013

Zoom out

Zoom in

1/56

WWW.VONROC.COM

DESCRIPTION

The numbers in the text refer to the diagrams on

pages 2 - 3

Fig. A-E

1. Switch (0/I/II)

2. Ventilations slots

3. Nozzle outlet

4. LCD digital display

4.1 Pre-set input

4.2 Flasher

4.3 Pre-set mode indication

4.4 Temperature indication

4.5 Air ﬂow indication

5. Storage button

6. Mode Selection button

7. Adjustment button for temperature-

8. Adjustment button for temperature+

9. Adjustment button for air ﬂow +

10. Adjustment button for air ﬂow -

11. Flat rear side

12. Fishtail nozzle

13. Reduction nozzle

14. Glass protection nozzle

15. Spoon reﬂector nozzle

16. Scraper

3. OPERATION

The Hot air gun can be used for:

• Plumbing work like tube connections, solder,

bowing tubes;

• Removing paint, varnish and lacquer without

ﬁrerisk;

• Quickly drying of appliances which have beco-

me wet;

• Drying surfaces for quick repairing;

• Removing self-adhesive labels in a clean way

placing PVC labels;

• Blistering after sticking PVC materials can be

smoothed after heating;

• Easy removing of vinyl carpeting:

• Forming all synthetics with a low temperature

(400 degrees) among which polyethylene and

PVC;

•

Forming all synthetics with a high temperature

(600 degrees) among which acryl and plexiglass;

• Smelting synthetics, among which matters and

foils with PVC layer;

• Applying heat shrinking tubes;

• Shrinkwrappers;

• Thawing tubes and engines;

• Repairing ﬁnishing layers: enamel of bath and

household appliances; applying epoxypowder

coverlayers;

• Repairing of ski’s, surf-boards and other sports

goods;

•

Unscrewing too fast ﬁxed screws and connections.

Operation (Fig. A)

You can work manually with this hot air gun or you

can put it in a vertical position.

• Check if the mains switch is on position “0”

before you connect the apparatus;

• Keep the main lead always away from the hot

air stream and the mouth piece;

• Put the mains switch in position ‘I or II’ to let

your hot air gun operate:

"I" = 50 degrees, air ﬂow 250-500 l/min.

“II” = 50-650 degrees, air ﬂow 250-500 l/min.

“0” = Off

Temperature and airﬂow settings (Fig. B)

• Turn switch to I or II, and the heat gun will start.

• Turn switch to II.

- Select the desired temperature range using

the adjustment buttons (7, 8).

- The temperature can be adjusted in 10°C

increments from 50°C - 650°C.

- The ﬂasher (4.2) will keep ﬂashing before

the output temperature reaches the desired

temperature.

- Select the desired air ﬂow level using the

adjustment buttons (9, 10).

• Turn switch to I, the temperature is ﬁxed at

50°C for cooling down.

Pre-set mode selection (Fig. B, C, D)

•

4 pre-set modes are available for quick selection

of temperature and airﬂow setting for most

frequent and deﬁned applications.

- Turn on the tool.

- Click the mode selection button (6) to select

one of available pre-sets.

Pre-set mode input (Fig. B, C, D)

• Select one pre-set mode (see pre-set mode

selection)

• Set desired temperature and airﬂow by clicking

buttons (7, 8, 9, 10)(see temperature and

airﬂow settings).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc HA502AC in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vonroc HA502AC Manual

Product: