Manual Vonroc HA502AC (page 6 of 56) (English, German, Dutch, French, Italian, Polish, Spanish)

764013

Zoom out

Zoom in

1/56

WWW.VONROC.COM

• Prevent damage of the heating element. Do not

lock or block the mouth piece;

• Do not leave the appliance when switched on;

• Do not use the appliance for drying hair or for

drying living human beings in general;

• Do not use the appliance in a bath, above water

or in spaces where easy inﬂammable liquids are

used.

This appliance operates at a temperature of

600 degrees without visible signs of this

temperature (no ﬂames), still there is a

chance of ﬁre risk. Watch out for the hot air

stream from the mouth piece. This air

stream can cause burns.

When operating the appliance

• If you are going to use the hot air gun, vapours

and gas can be released during a short time.

This can be harmful for your health. Asthmatics

can suffer hindrance of it;

• Before connecting the plug to the mains voltage

you have to check if the switch is in position “0”;

• Keep the mains lead always away from the

mouthpiece of the hot air gun;

• Keep children and animals away from the appli-

ance if you are using it.

Immediately switch off the appliance when:

• Plug and/or cable are defective or damaged;

• The switch is defective;

• You smell or see smoke caused by scorched

insulation from the hot air gun.

Electrical safety

When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of ﬁre, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

Always check that the power supply

corresponds to the voltage on the rating

plate.

Class II machine - Double insulation - You

don’t need any earthed plug

2. MACHINE INFORMATION

Intended use

This hot air gun is intended for a wide range of

applications including plastic welding, the defor-

mation of material, heat-shrink tubing, removing

material residues or drying paint. It is also suitable

for loosening of adhesive joints and the defrosting

of water lines.

TECHNICAL SPECIFICATIONS

Model No. HA502AC

Voltage 220-240 V~

Frequency 50/60 Hz

Power input 2000 W

Weight 1.0 kg

IP Class IP 20

Position I

Air ﬂow 250-500 l/min

Air temperature 50 °C

Position II

Air ﬂow 250-500 l/min

Air temperature 50-650 °C

Vibration level

The vibration emission level stated in this instruc-

tion manual has been measured in accordance

with a standardized test given in EN60745; it may

be used to compare one tool with another and as

a preliminary assessment of exposure to vibration

when using the tool for the applications mentioned.

• Using the tool for different applications, or with

different or poorly maintained accessories, may

signiﬁcantly increase the exposure level.

• The times when the tool is switched off or when

it is running but not actually doing the job, may

signiﬁcantly reduce the exposure level.

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work patterns.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc HA502AC in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vonroc HA502AC Manual

Product: