Manual Vonroc GT502AC (page 6 of 72) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish)

778575

Zoom out

Zoom in

1/72

WWW.VONROC.COM

and grasping surfaces do not allow for safe

handling and control of the tool in unexpected

situations.

5) Service

a) Have your power tool serviced by a qualiﬁed

repair person using only identical replacement

parts. This will ensure that the safety of the

power tool is maintained.

ADDITIONAL SAFETY INSTRUCTION GRASS

TRIMMER

• Keep the area you are working in clean and tidy.

• Avoid operating the trimmer in rain or wet

environments especially when there is a risk of

lightning.

• Work only in daylight or in good artiﬁcial light.

• Do not use power tools where there is a risk of

ﬁre or explosion - i.e. near ﬂammable liquids or

gases. Power tools create sparks, which may

ignite the dust or fumes.

• Never operate the product when you are tired,

ill or under the inﬂuence of alcohol, drugs or

medicine.

• Always wear long heavy trousers, boots and

gloves. Do not wear loose clothing, jewellery,

short trousers, sandals and never work barefoot.

• Wear safety eye protection and ear defenders

when operating the machine.

• Keep ﬁrm footing and balance. Do not overre-

ach.

• Never allow children or people unfamiliar with

these instructions to use the trimmer. Local

regulations may restrict the age of the operator.

When not in use, store the trimmer out of reach

of children.

• Never work with this trimmer while people,

especially children or pets are nearby.

• Do not put hands or feet near the cutting sys-

tem.

• Never ﬁt metal cutting elements to this trimmer.

• Inspect and maintain the trimmer regularly.

• Never operate the trimmer with missing or

broken guards or shields or without guards or

shields in position.

• Before using the machine and after impact,

check for signs of wear or damage and repair if

necessary

• Wait until the spool line has completely stopped

before touching it. The spool line continues to

rotate after the trimmer is switched off; a rota-

ting wire can cause injury.

• Operating the trimmer in wet grass decreases

the efﬁciency of performance.

• Switch off when transporting the trimmer to and

from the area to be worked on.

• Switch on the motor only when the hands and

feet are away from the cutting means.

• Have the trimmer repaired only by an authorized

customer service agent.

• Always ensure that the ventilation slots are kept

clear of debris

• Store the machine in a secure, dry place out of

the reach of children. Do not place other objects

on top of the machine.

• Do not operate the machine without the wire

attachment ﬁtted

• Do not force the appliance - let it work at the

rate for which it was intended.

• We strongly recommend the use of an RCD (Re-

sidual Current Device) of not more than 30 mA,

at the plug socket when using this appliance.

• Do not allow the power cord to lay on or across

sharp objects that might pierce the outer insu-

lation. Carry out a visual inspection of the power

cord before use and if it is damaged, have it

replaced by a specialist service centre. Do not

use the appliance if the cord is damaged.

• If the cord becomes damaged during use,

disconnect the cord from the power supply

immediately. DO NOT TOUCH THE CORD BEFORE

DISCONNECTING THE SUPPLY. Do not use the

appliance if the appliance cord or the extension

cord are damaged.

• Keep extension cord away from cutting ele-

ments.

• Always ensure the guards are ﬁtted when using

the tool.

• Check the cable for damage before starting

work and replace if necessary.

• Inspect and maintain the trimmer regularly.

Have the trimmer repaired only by an authorised

repairer.

• Remove the plug from the power socket before

attempting any maintenance.

Danger! When Switching off the machine,

wait for the machine and its spool to come

to a complete standstill before putting the

machine down.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc GT502AC in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 7.17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vonroc GT502AC Manual

Product: