778546
5
Zoom out
Zoom in
Previous page
1/44
Next page
EN
5
WWW.VONROC.COM
a) The appliance is not to be used by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of expe-
rience and knowledge, unless they have been
given supervision or instruction
b) Children being supervised not to play with the
appliance
c) Do not recharge non-rechargeable batteries!
d) During charging, batteries must be placed in a
well ventilated area!
e) Integrated batteries may only be removed
for disposal by qualified personnel. Opening
the housing shell can destroy the power tool.
To remove the battery from the power tool,
press the On/Off switch (6) until the battery is
fully discharged. Unscrew the screws on the
housing and remove the housing shell in order
to remove the battery. To prevent a short circuit,
disconnect the connectors on the battery one
at a time and then isolate the poles. Even when
fully discharged, the battery still contains a
residual capacity, which can be released in case
of a short circuit.
RESIDUAL RISKS
Even when the power tool is used as prescribed it
is not possible to eliminate all residual risk factors.
The following hazards may arise in connection with
the power tool’s construction and design:
a) Health defects resulting from vibration emission
if the power tool is being used over longer
period of time or not adequately managed and
properly maintained.
b) Injuries and damage to property to due to bro-
ken accessories that are suddenly dashed.
2. MACHINE INFORMATION
Intended use
The glue gun is intended for the quick gluing of
clean, dry and grease-free materials with hot-melt
adhesives. The tool is intended for hobby use at
home only.
TECHNICAL SPECIFICATIONS
Model No. GG502DC / S_
GG502DC
Voltage 4V
Battery 1500mAh Li-Ion
Built in charger 5V USB
Heating time Max. 25 sec
Temperature 170°C - Automatic shut
off 6.5 min
Diameter glue stick 7 mm
Charging time app. 3 hours
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-3.
1. Trigger
2. Base
3. Nozzle
4. Heat up LED indicator
5. On/off switch
6. Glue gun charging contacts
7. Battery and charger LED indicator
8. Base charging contacts
9. Drip tray
10. Micro USB charging port
11. Glue sticks
12. Charger cable
3. OPERATION
The machine must be charged before first
use.Charging the device (Fig. B-C)* Plug the
charger cable (12) (included) into an
adapter (not included).* Plug the charger
cable (12) in the micro USB charging port
(10). See figure B
Place the glue gun in to the base and make sure
the glue gun charging contacts (6) and base
charging contacts (8) are connected. See Fig. C.
The charger LED indicator (7) will lighten up and
show the charging status.
NOTE: Be sure that the metal contacts (6+8) in the
glue gun and base are clean before charging.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc GG502DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc GG502DC in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 4.45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info