778553

Vonroc CT501AC Manual

7
Zoom out
Zoom in
Previous page
1/24
Next page
EN
7
WWW.VONROC.COM
Never operate the axle locking button if the
engine is still rotating.
Stand for the Combitool
• Assembly the stand (11) on to the workbench
clamp (12).
• Mount the assembled stand on the side of a
workbench or worktop with a maximum thick-
ness of 60 mm.
• The height of the stand is adjustable. Loosen the
top tube of the stand by turning it anticlockwise.
Draw the tube out to its maximum height and se-
cure it by turning the tube clockwise. The height of
the suspension bracket is adjustable by loosening
the black knob. After adjusting the suspension
bracket to the correct height, retighten the knob.
• Attach the Combitool to the suspension bracket
of the stand; this suspension bracket can be
turned 360°.
Accessories for the Combitool
Always check that the maximum rpm of the accessory
is suitable for the maximum speed of the Combitool.
Grinding stones (Fig. D)
When using a grinding stone the first time, use the
dressing stone to balance it. The dressing stone
can also be used for cleaning the surface or to give
the grinding stone a special shape.
Material Speed setting
Stone, shell -
Steel +
Aluminium, brass + -
Plastic -
Felt wheels (Fig. E)
The felt wheels should be screwed on the mandrel.
Material Speed setting
Steel +
Aluminium, brass + -
Plastic +
Sanding bands and disc (Fig. F)
Material Speed setting
Wood + +
Steel -
Aluminium, brass + -
Plastic -
High speed cutter, Diamond wheel point and Drill
(Fig. G)
Material Speed setting
Stone, shell Max
Steel + -
Aluminium, brass + +
Plastic -
4. MAINTENANCE
Make sure that the machine is not live
when carrying out maintenance work on
the motor.
Clean the machine casings regularly with a soft
cloth, preferably after each use. Make sure that the
ventilation openings are free of dust and dirt. Re-
move very persistent dirt using a soft cloth moiste-
ned with soapsuds. Do not use any solvents such
as gasoline, alcohol, ammonia, etc. Chemicals such
as these will damage the synthetic components.
ENVIRONMENT
Faulty and/or discarded electrical or
electronic apparatus have to be collected at
the appropriate recycling locations.
Only for EC countries
Do not dispose of power tools into domestic waste.
According to the European Guideline 2012/19/EC
for Waste Electrical and Electronic Equipment and its
implementation into national right, power tools that
are no longer usable must be collected separately
and disposed of in an environmentally friendly way.
WARRANTY
VONROC products are developed to the highest
quality standards and are guaranteed free of
defects in both materials and workmanship for the
period lawfully stipulated starting from the date of
original purchase. Should the product develop any
failure during this period due to defective material
and/or workmanship then contact VONROC directly.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc CT501AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc CT501AC in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2.15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info