778299
8
Zoom out
Zoom in
Previous page
1/80
Next page
8
EN
WWW.VONROC.COM
2. MACHINE INFORMATION
Intended use
This circular saw is intended for lengthwise, cross-
wise and bevel cutting in wood while keeping the
baseplate resting firmly on the workpiece. Sawing
plastics or metals is not permitted.
The power tool with the fitted sawblade is designed
with sufficient capacity for sawing hardwood and
softwood as well as chipboard and fibreboard. The
sawblade is not designed for cutting firewood. Do
not use the saw to cut materials other than those
specified described in manual.
TECHNICAL SPECIFICATIONS
Model No. CS502AC
Voltage 230-240 V~
Frequency 50 Hz
Power input 1200W
No load speed 5500/min
Saw blade size Ø185x Ø20x2.4mm
Sawing capacity 0° 65mm
Sawing capacity 45° 43mm
IP Class IP20
Weight 3.47 kg
Sound pressure level LPA 92.8 dB(A), K=3dB(A)
Sound power level LWA 103.8 dB(A), K=3dB(A)
Vibration 3.201 m/s2 K=1.5 m/s
2
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
with a standardized test given in EN62841; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work pat-
terns.
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-3.
1. Handgrip
2. On/off switch
3. Lock-off button
4. Power cord
5. Auxiliary handle
6. Scale for bevel angle
7. Clamping bolt for bevel angle
8. Cutting mark, 45°
9. Cutting mark, 0°
10. Clamping bolt for parallel guide
11. Dust extraction port
12. Lever for retracting lower guard
13. Upper guard
14. Lower guard
15. Clamping bolt
16. Clamping flange
17. Baseplate
18. Saw blade
19. Spindle lock
20 Lever for depth adjustment
21.Scale for depth adjustment
22. Parallel guide
23. Carbon brush screw
3. ASSEMBLY
Before assembly, always switch off the
machine and remove the mains plug from
the mains.
Replacing the saw blade (Fig. A, B)
When mounting the saw blade, wear
protective gloves. Danger of injury when
touching the saw blade.
Only use saw blades that correspond with
the characteristic data given in the
operating instructions.
Do not under any circumstances use
grinding discs as the cutting tool.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc CS502AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc CS502AC in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 6.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info