819207
6
Zoom out
Zoom in
Previous page
1/84
Next page
6
EN
WWW.VONROC.COM
Model No. CD801AA
Battery Type Lithium-Ion
Voltage 20V
Capacity 2.0 Ah
Recommended charger CD802AA
Weight 0.3 kg
Model No. CD802AA
Charger input 220-240V, 50Hz 0.4A
Charger output 21V 2.5A
Charging time 2Ah battery 60 minutes
Charging time 4Ah battery 120 minutes
Recommended batteries CD801AA, CD803AA
Weight 0.36 kg
Model No. CD803AA
Battery Type Lithium-Ion
Voltage 20V
Capacity 4.0 Ah
Recommended charger CD802AA
Weight 0.65 kg
Only use the following batteries of the VONROC
VPOWER 20V battery platform. Using any other bat-
teries could cause serious injury or damage the tool.
CD801AA 20V, 2Ah Lithium-Ion
CD803AA 20V, 4Ah Lithium-Ion
The following charger of the can be used to charge
these batteries.
CD802AA Quick charger
The batteries of the VONROC VPOWER 20V battery
platform are interchangeable with all the VONROC
VPOWER 20V battery platform tools.
DESCRIPTION
The numbers in the text refer to the diagrams on
pages 2.
1. Cartridge holder
2. Plunger
3. Rack
4. Feed rate indicator lights
5. Feed rate increase button (+)
6. Feed rate decrease button (-)
7. Rack handle
8. Trigger switch
9. Battery
10. Battery unlock button
11. Battery LED indicators button
12. Battery LED indicators
13. Charger
14. Charger LED indicators
3. ASSEMBLY
Remove the battery before carrying out any
work on the power tool.
The battery must be charged before fi rst
use.
Inserting the battery into the machine (Fig. B-1)
Ensure that the exterior of the battery is clean and
dry before connecting to the charger or machine.
1. Insert the battery (9) into the base of the ma-
chine as shown in Fig. B-1.
2. Push the battery further forward until it clicks
into place.
Removing the battery from the machine (Fig. B-1)
1. Push the battery unlock button (10).
2. Pull the battery out of the machine like shown
in Fig. B-1.
Checking the battery charging status (Fig. B-2)
To check the battery charge status, push the
button (11) on battery shortly.
The battery has 3 lights indicating the charge
level, the more lights that burn, the more
charge the battery has left.
When the lights are not burning it means the bat-
tery is empty and must be charged immediately.
Charging the battery with the charger (Fig. B-2)
1. Take the battery (9) from the machine.
2. Turn the battery (9) to upside down position and
slide it onto the charger (13) as shown in Fig. B-2.
3. Push the battery until it is fully pushed into the
slot.
4. Plug the charger plug into an electrical outlet
and wait for a while. The LED indicators on the
charger (14) will lighten up and show the charg-
er status.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc CG501DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc CG501DC in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 3.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info