763965
6
Zoom out
Zoom in
Previous page
1/44
Next page
6
EN
WWW.VONROC.COM
TECHNICAL SPECIFICATIONS
Model No. CD507DC
Charger cable CD816AA
Recommended charger
adapter
5V d.c USB
500mA to 1500mA
Type plug side A USB type A
Type plug side B USB type C
Torque Max. 5Nm
Rechargeable Battery pack 4V Li-ion 1.5Ah
Chuck capacity ¼” (6.35mm) hex
No load speed 200 /min
Sound pressure level L
PA
55.5 dB(A) K= 3 dB(A)
Sound power level L
WA
66.5 dB(A) K= 3 dB(A)
Hand-arm vibration a
h
(screw driving without impact) 0.912 m/s
2
K=1.5 m/s
2
DESCRIPTION
The numbers in the text refer to the diagrams on
pages 2-3
1. Machine
2. Charging socket
3. Battery indication light
4. Bit holder
5. Direction switch
6. On / off switch
7. Work light
8. Charger cable
9. Direction indication light
10. Screwdriver bit
3. OPERATION
The machine must be charged before first
use.
Charging the device (Fig. C)
Plug the charger cable (6) (included) into an
adapter (not included).
Plug the charger cable (6) into the machine.
(fig. J)
Plug the charger plug into an electrical outlet
and wait for a while. The charger indication
light (5) will lighten up and show the charging
status.
LED Charger status
Red Battery charging in progress.
Green Battery charging finished, battery fully
charged.
After the battery is fully charged remove the char-
ger plug from the outlet and remove the small plug
from the device.
Fully charging the battery may take up to 2 - 3
hours.
Fitting and removing drills or screwdriver bits
(Fig. B)
The machine bit holder (4) is suitable for drills and
screwdriver bits with a standard ¼ inch hexagonal
shaft. To fit a screwdriver bit:
Insert the screw driver bit (10) into the machi-
ne’s bit holder (4), it will be hold by a magnet.
The screw driver bit can be removed by pulling
it out of the bit holder again.
Adjusting the direction of rotation (Fig. D)
Set the direction switch (5) to position ‘’ in
order to drive screws or to use it for drilling.
Set the direction switch (5) to position ‘’ in
order to remove screws.
Tip: The direction indication light (9) on top of the
machine will also show the direction of rotation.
Switching the machine on and off (Fig. A)
Pressing the on/off switch (6) will activate the
machine.
Releasing the on/off switch (6) will stop the
machine.
Move the direction switch (5) to the middle
position to lock the movement of the on/off
switch. It cannot be activated in this position.
The machine is equipped with electronic
overload protection function. When the
machine gets overloaded it will shut down
automatically. When this happens, please
wait for at least 5 seconds to let the
overload protection reset itself.
Spindle lock function
The machine is fitted with an automatic spindle
lock feature. When the on/off switch (6) is not
pressed, the bit holder (4) rotation is locked. Now
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc CD507DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc CD507DC in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info